Contact Platform Support
Help CenterDIN Rail-Mounted PT100 to 4-20mA Thermal Resistance Isolation Transmitter
Related Products
-
DC Current/Voltage 4-20mA/0-5V/0-10V Isolation TransmitterNegotiableMOQ: 2 Pieces -
Electrometic Isolation Transmitter/Converter DIN3 Isoem A7-P2-O5NegotiableMOQ: 2 Pieces
-
Frequency to Analog Signal Converter (ISO F-P-O)NegotiableMOQ: 2 Pieces
-
Switching to Analog Multi-channel Isolation Transmitter:ISO K-P-OUS$ 12 - 22MOQ: 2 Pieces
-
0-75mv/0-50mv to 4-20mA/0-5V/0-10V Signal ConverterNegotiableMOQ: 2 Pieces
DIN Rail-Mounted PT100 to 4-20mA Thermal Resistance Isolation Transmitter
Main Features:
Three-wire, four-wire or two-wire PT100/PT1000 thermal resistance signal input
Accuracy, Linearization error grade: 0.2
Linearization disposal and long line compensate circuit
Isolation Voltage: 3000VDC input/power/output
Power: 5V/12V/15V/24VDC or 110VAC/220VAC
International standard signal output: 4-20mA/0-5V/0-10V etc.
Small size, low cost
Standard DIN Rail-mounted: DIN 1x1
Industrial temperature range: - 45 ~ + 85 º C
Application:
PLC/DCS systemic temperature signal isolation, acquisition.
Industrial high accuracy temperature measurement
Thermal resistance signa isolation and temperature control
Ground-loop elimination
Temperature sensor signal converter to standard signal
Oil temperature measurement and alarm
No distortion in long distance signal transmission
Electric supervision, medical application and safe isolated bar.
Part number and description:
DIN1X1 ISO Z - W - P - O
Type
Z1: PT100 Z2: PT10
Z3: Cu100 Z4: Cu50
Input T Range
W1: -20-100 º C
W2: 0-100 º C
W3: 0-150 º C
W4: 0-200 º C
W5: 0-400 º C
W6: User-defined
Power Supply
P1: DC24V P2: DC12V
P3: DC5V P4: DC15V P8: User-defined
Output Signal
O1: 4-20mA O2: 0-20mA O4: 0-5V O5: 0-10V
O6: 1-5V O7: User-defined
Examples:
1. Signal Input: PT100, temperature range: 0~100 grade. C; Signal output: 4-20mA; Power: 24V
Part No.: ISO Z1-W1-P1-O1
2. Signal input: Cu50, temperature range: 0~100 grade. C; Signal output: 0-5V; Power: 12V
Part No.: ISO Z4-W2-P2-O4
| Parameter | Test Condition | Min | Typical | Max | Unit |
| Isolated voltage | 1min | 1500 | 3000 | VDC | |
| Non-linearity(to temperature) | 0.2 | 0.5 | %FSR | ||
| Output Voltage | 5 | 10 | V | ||
| Output Current | 20 | mA | |||
| Frequency response | 10 | mS | |||
| Load capability(Voltage) | Vout=10V | 2 | kΩ | ||
| Load capability(Current) | Iout=20mA | 500 | 650 | Ω | |
| Signal output ripple | No-filter | 10 | mV | ||
| Output temperature drift | 50 | ppm/ºC | |||
| Assistant power(Voltage) | User-define | 3.3 | 12 | 24 | VDC |
| Assistant power(Current) | VD=12V | 42 | mA | ||
| Power consumption | 0.3 | 0.5 | 1 | W | |
| Operating temperature | -45 | 85 | |||
| Storage temperature | -55 | 125 | ºC |
Send Inquiry to This Supplier
You May Also Like
-
DIN Rail DC Current or Voltage Isolated DistributorNegotiableMOQ: 2 Pieces
-
Speed Pulse Signal Converter IC Sy-S3 -P2 -O1NegotiableMOQ: 2 Pieces
-
Displacement Sensor Position Sensor Signal ConditionerNegotiableMOQ: 2 Pieces
-
Potentionmeter Signal Isolator Resistance Signal TransmitterNegotiableMOQ: 2 Pieces
-
(2: 1) Wide Input Range 3W Voltage Transmitter Dw3-48s05NegotiableMOQ: 2 Pieces
-
Low Cost 2-Wire Passive 4-20mA to Voltage Singnal Converter Sy 4-20mA-O2.5NegotiableMOQ: 2 Pieces
-
AC to DC 0-10mA/4-20mA/0-5V/0-10V Output TransmitterNegotiableMOQ: 2 Pieces
-
Rtd PT1000 to 0-10V Signal Isolated Transmitter With 3kv IsolationNegotiableMOQ: 2 Pieces
-
Thermal Resistance Temperature Isolation Transmitter (ISO Z-W-P-O)NegotiableMOQ: 2 Pieces
-
Frequency Signal to DC Current/Voltage Signal Isolation Transmitter IC 0-1kHz/0-5kHz/0-10kHz to 1-5V/0-5V/0-10V/4-20mA INegotiableMOQ: 2 Pieces
