Contact Platform Support
Help CenterMulti- Head Floor Scabblers
Related Products
-
Concrete Scarifier Used in Concrete Road|factory Price in PromotionUS$ 800 - 1500MOQ: 1 Piece -
Hand Held Scabbler|multi Heads|factory Price in PromotionUS$ 800 - 2200MOQ: 1 Piece
-
Chisel Hand-Held Floor Scabbler|Pneumatic|Multi-HeadsUS$ 100 - 500MOQ: 1 Piece
-
Concrete Floor Grinder|Polisher|Diamond HeadsUS$ 800 - 1500MOQ: 1 Piece
-
Hand-Pushing Scabbler|Multi-Headed|PneumaticUS$ 500 - 2000MOQ: 1 Piece
Main View Product Description:
1 models small, flexible operation,
2 life of more than 3000m2
3 per hour hammering area by different concrete strength up to 30-100 square meters.
4 to ensure quality first, enhance the competitive advantage
Description of Multi- Head Floor Scabblers:
The concrete floor scabbler chisel is a tool that handles the surface of the main body that has been completed so that the construction surface of the two construction stages is similar to the tool of 'chopping ax'. Usually cutting hair machine is used in the present Rao concrete structure, in the cast plate Raojiao finished, to chisel hair, the next layer of pouring, so that the concrete bond firmly. So "cutting hair machine" is also generally known as "concrete cutting hair machine."
Two products use:
concrete floor scabbling for the highway bridge, airports, bridges, parking lots and other concrete floor of the new pavement on the ground surface of the concrete floating slurry removal, to achieve uniform and rough design. The machine is also widely used in a variety of old ground to do before the renovation of the floor to remove the damaged parts of the ground scabbling concrete floor, epoxy, do anti-slip surface, do a new layer of hair, fully reflect the low cost and efficient application value The At the same time for the reservoir, dam leakage, dangerous bridge bridge reinforcement, power plants, highways, high-speed railway, tunnel letters and other building reinforcement, and its wide range of applications.
Parameters of Multi- Head Floor Scabblers:
machine type |
ZTMS—11A |
ZTMS—15A |
ZTMS—23A |
weight |
80KG |
108KG |
156KG |
Working width |
1260mm |
1260mm |
1260mm |
B.P.M The number of hammers per minute |
2200﹡11 |
2200﹡15 |
2200﹡23 |
Air consumption |
500l/min |
700l/min |
900l/min |
The noise level is decibel |
56db |
56db |
56db |
Vibration Level Mean Equivalent |
4.96 Square meter per second |
4.96 Square meter per second |
4.96 Square meter per second |
Development of concrete floor scabbler
The traditional method of cutting the hair of the machine: the use of a sharp strike tool in the concrete surface of the piston to fight, so that the old and new concrete bonded firmly. However, the traditional method of cutting hair has a variety of drawbacks, such as inefficient, mechanical oscillation caused by acoustic transmission, injury was chiseled body and thus affected by the chisel body life.
At present, for a small area of chisel hair (local chisel hair, facade chisel hair, side chisel hair, the top chisel hair), you can use hand-held small hair cutting machine, the effect is good, and will not cause the original structure damage.
Because now a lot of chiseled machinery products will not only undermine the protective layer of scabbling concrete floor, but also the destruction of the original structure and even catastrophic destruction, so now in many projects, especially the bridge, tunnel concrete chisel broken , Many large-scale mechanical scissors have been banned. The most widely used and safe is the "lossless chisel" of high pressure water jets.
Send Inquiry to This Supplier
You May Also Like
-
Pneumatic Hand Held Floor ScabblerUS$ 1500 - 3500MOQ: 1 Piece
-
Concrete Floor Grinder MachineUS$ 700 - 2000MOQ: 1 Set
-
Concrete Grinder Floor Polish Polishing MachineUS$ 700 - 2000MOQ: 1 Set
-
Concrete Floor Grinder Machine Polishing MachineryUS$ 700 - 2000MOQ: 1 Set
-
Silent Dust Free Concrete Floor Grinding MachineUS$ 450 - 5000MOQ: 1 Piece
-
Silent Dust Free Concrete Floor Grinding MachineUS$ 450 - 5000MOQ: 1 Piece
-
Silent Dust Free Concrete Floor Grinding MachineUS$ 450 - 5000MOQ: 1 Piece
-
Electric Concrete Floor Grinder|edging Grinding,small Size,planetary,large SizeUS$ 500 - 2000MOQ: 1 Piece
-
Electric Trowel Machine for Polishing Cement PavementUS$ 700 - 2000MOQ: 1 Set
-
Hand-Pushing Scabbler|Multi-Headed|PneumaticUS$ 500 - 2000MOQ: 1 Piece
