Wilcoxon 4-20 mA vibration sensor PC420A D dual output series Acceleration sensors with dynamic vibration output

Wilcoxon 4-20 mA vibration sensor PC420A D dual output series Acceleration sensors with dynamic vibration output 

OUTPUT, 4-20 mA

Full scale 20 mA, ±5% see table 1 on page 1

Frequency response ± 10%

± 3 dB

10 Hz - 1.0 kHz

4.0 Hz - 2.0 kHz

Repeatability ± 2%

Transverse sensitivity, max 5%

OUTPUT, DYNAMIC PC420Ax-yy-DA PC420Ax-yy-DV

Sensitivity, ±10% 100 mV/g 100 mV/in/sec

Full scale 20 g 1.5 ips at 1 kHz

Frequency response: ±3 dB 2.5 Hz - 10 kHz 2.5 Hz - 2.5 kHz

Amplitude nonlinearity, max 1%

Resonant frequency, mounted, nominal 25 kHz

Transverse sensitivity, max 5%

Power requirements (two-wire loop power):

Voltage at sensor terminal 10 - 30 VDC

Loop resistance 1 at 24 VDC, max 700 Ω

Turn on time, 4-20 mA loop<30 seconds

Dynamic output, bias output voltage +3.3 VDC, re: connector pin B

Dynamic output noise, equiv. g, 2.5 Hz - 10 kHz

PC420Ax-yy-DA PC420Ax-yy-DV

2 mg 0.002 ips

Grounding case isolated, internally shielded

Temperature range –40 to +85° C

Vibration limit 250 g peak

Shock limit 2,500 g peak

Sealing hermetic

Sensing element design PZT ceramic / shear

Weight 162 grams

Case material 316L stainless steel

Mounting 1/4-28 tapped hole

Output connector 3-pin, MIL-C-5015 style

Mating connector R6G type

Recommended cabling J9T3A

Models:

PC420AR-05-DA

PC420AR-10-DA

PC420AR-20-DA

PC420AP-05-DA

PC420AP-10-DA

PC420AP-20-DA