G09-O3 Series Ozone Monitor and Controller

G09-O3 Series
Ozone Monitor and Controller with Modbus interface and 1X analog +2X dry contact outputs

  • Real time detection and monitoring ambiance ozone level
  • Electrochemical ozone sensor inside
  • Preset two stage alarm points for ozone measurement
  • Buzzer alarm and 3-color backlight LCD indication
  • Provide 2x relay dry contact outputs and 1x analog output
  • Modbus RS485 communication Interface
  • Higher performance with lower price

G09-O3 Series Ozone Monitor and Controller Features
• Design for real time detecting and monitoring ambiance ozone level and temperature
• Electrochemical ozone sensor with  high sensitivity
• Particular LCD display with three color backlights (Green/Yellow/Red)
• Maximum ozone measuring range: 0~5000ppb (0~9.81mg/m 3 ) /0~1000ppb mAlso reset the measurement range by end user
• 2xOn/Off dry contact outputs for two stages alarm device, or control a ozone generator or a ventilator
• Buzzer alarm and 3-color backlight LCD indication
• Provide 1X analog output (0,2~10VDC/4~20mA) (can be used as transmitter)
• Modbus RS485 communication interface, 15 KV antistatic protection, individual IP address
• Provide two easy ways for calibration and setup alarm points via an infrared remote controller or via the RS485 interface.
• Temperature measurement and display
• Humidity measurement and display optional
• Multiple application, wall mounting type and desktop type
• Great performance with high quality and low price

G09-O3 Series Ozone Monitor and Controller Application
• Specially used for detecting indoor ambiance quality
• Real time measuring ozone level and analyzing: alarm when ozone level is over proof, control ozone concentrations by controlling related devices in order to reach a certain level in some special places
• Portable type for real time measuring and analyzing
• Anti-epidemic and disease prevention, sanitary inspection, environment protection, health protection, etc. G09-O3 series is the best device used to detect and analyze ozone concentration.

G09-O3 Series Ozone Monitor and Controller Specifications

G09-O3 Series Ozone Monitor and Controller Models Guide

Example: 
G09-O3-2021-B50 indicates the ozone detector with 2X on/off dry contact outputs and a Modbus RS485 interface, and the ozone range: 0-5000ppb.
G09-O3-3101-B10 indicates the ozone detector with 1X 0~10VDC output and a Modbus RS485 interface, LCD display. Humidity option. ozone range: 0-1000ppb.