Electrode Paste
We manufacture and supply and export in large quantity of electrode paste. Introduction and properties shown below:
Melted by the electric stove, open hearth furnace and cupola furnace featuring less impurity, consistent granularity and the color and uniform composition stability. It can also be made according to customer's requirement of chemical production. High calcium, high aluminum, high silicon content of different requirements of the product can satisfy the low sulfur, low carbon and
low phosphorus index requirements.Electrode Paste is more and more importance by steel enterprises due to its uniform composition, low melting point, fast melting speed and shorten smelting time etc which has been hailed as a new material in the 21st century.
It is mainly used in outside refining of the furnace in steel metallurgical. The premelting type multi-functional refining slag has been applied maturely abroad such asKorea,Japan, Europe, theUnited Statesand other developed countries, also cause the attention of domestic metallurgical industry gradually.
Electrode paste is the conductive material which supply to submerged arc furnace such as ferroalloys furnace and carbide furnace. It has the advantages of high temperature resistance, small thermal expansion coefficient and high mechanical strength,. The small resistance coefficient can reduce the power loss. The low porosity can slow the oxidizing electrode in the heating state.
Electrode Paste is more and more importance by steel enterprises due to its uniform composition, low melting point, fast melting speed and shorten smelting time etc which has been hailed as a new material in the 21st century.
It is mainly used in outside refining of the furnace in steel metallurgical. The premelting type multi-functional refining slag has been applied maturely abroad such asKorea,Japan, Europe, theUnited Statesand other developed countries, also cause the attention of domestic metallurgical industry gradually.
Ash(% max) |
2 |
3 |
4 |
5 |
6 |
V.M.(% max) |
11.0-14.0 |
11.0-14.0 |
11.0-14 |
12.0-15.0 |
12.0-15.5 |
Compressive Strength(Mpa Min) |
20 |
20 |
18 |
17 |
15.7 |
Specific Resistivity(μΩm Max) |
65 |
65 |
68 |
68 |
75 |
Bulk Densityg/cm3) |
1.38 |
1.38 |
1.38 |
1.38 |
1.38 |
Plasticity |
20-40% |
20-40% |
20-40% |
20-40% |
20-40% |
Specifications and paste sizes:
Trapezoid shape electrode paste size 80mm(upper)*100mm(bottom)*60mm(H)
Saucer shape electrode paste 60mm*70mm
Cylinder shape electrode paste size as per customer's order
Electrode paste is the conductive material which supply to submerged arc furnace such as ferroalloys furnace and carbide furnace. It has the advantages of high temperature resistance, small thermal expansion coefficient and high mechanical strength,. The small resistance coefficient can reduce the power loss. The low porosity can slow the oxidizing electrode in the heating state.
Send Inquiry to This Supplier
You May Also Like
-
Electrode PasteUS$ 500 - 700MOQ: 20 Tonnes
-
Electrode PasteUS$ 500 - 800MOQ: 20 Metric Tons
-
Electrode PasteUS$ 400 - 600MOQ: 20 Tons
-
Soderberg Electrode Paste Self Baking Carbon Electrode PasteUS$ 550 - 750MOQ: 20 Metric Tons
-
Graphite Electrode PasteUS$ 450 - 950MOQ: 40 Tons
-
Graphite Electrode PasteUS$ 350 - 700MOQ: 1 Ton
-
Electrically Calcined Anthracite Coal For Electrode PasteUS$ 200 - 500MOQ: 5 Metric Tons
-
Kafuter K-5213 High Thermal Conductive Paste Carbon Electrode PasteUS$ 8 - 50MOQ: 10 Cartons
-
Carbon Electrode Paste/soderberg Electrode Paste/electrode PasteUS$ 400 - 700MOQ: 1 Ton
-
Electrode Paste To Application In Alloys Plant and Calcium Carbide FactoriesUS$ 600.00 - 600.00MOQ: 100 Metric Tons
