Contact Platform Support
Help CenterBrooks Mechanical Pressure Regulator Model 8601
Related Products
-
FANN Resistivity Meter Model 88C 207960US$ 680 - 750MOQ: 1 Piece -
FANN Instruments Model 35 Viscometer 207199 and 10095275NegotiableMOQ: 1 Piece
-
FANN Instrument Filter Paper HPHT / LPLT PressesUS$ 10 - 15MOQ: 1 Box
-
WADECO Inc BY-0637 Model 10 (Type F) Pressure Gauge, 0-10,000US$ 1500 - 1600MOQ: 1 Piece
-
FANN VISCOMETER MODEL 35SA 10095275 207199US$ 20 - 22MOQ: 1 Piece
Brooks Mechanical Pressure Regulator Model 8601
Model 8601 Pressure Overview OverviewOverview Product Featur oduct Featuroduct Features Mechanical Pressure Regulator Model 8601 Pressure Regulator DS-PR-8601-eng January, 2018 Brooks® 8601 Pressure Regulators are high precision supply pressure regulators which are direct-acting, non-relieving units that provide bubble-tight shut-off on helium at 100 psi. Compact and economical, these units are assembled in a “clean room” environment and are tested under simulated operating conditions. • Compact design • Suitable for line or panel mounting • Pressure gauge connection • Bubble-tight shut-off to 100 psi • Replaceable stainless steel inlet filter elementSpecifications 8601 Capacity CapacityCapacity The pressure regulator is ideal for use at up to a maximum of 1,000 sccm air Max. Inlet Supply Pressure 250 psi (1,724 kPa) Max. Working Temperature Standard: 140°F (60°C), Optional: 350°F (177°C) Total Pressue Drop Minimum: 10 psi, Maximum: 250 psi Connections ConnectionsConnections Standard: 1/8” NPT; Optional 1/4” NPT, 1/8” or 1/4” compression fitting, 1/4” ID hose adaptors Standard Seals & Fittings Brass w/Buna-N, Stainless Steel w/Viton fluoroelastomer Fittings FittingsFittings 1/8” FNPT or 1/4” FNPT Dimensions DimensionsDimensions See Dimensions Figure Maximum Temperature 250°F/121°C Typical Characteristics Helium 60 psig supply, 50 psig output Drift Less than 1% in first fifteen minutes to total of no more than 1.5% long term Supply Pressure Effect 10 psi increase in supply will not change output more than 0.07 psi Flow Regulation From 3 sccm to 70 sccm helium, output pressure will not decrease more than: 0.08 psig (0-10, 0-30 psi Regulators) 0.10 psig (0-60 psi Regulators), 0.125 psig (0-100 psi Regulators), 0.15 psig (0-150 psi Regulators), 0.175 psig (0-200 psi Regulators) Ambient Temperature Effect Standard 60 psi range, 0.020 psi/°F Base Line Oscillation .0025 psi Valve Adjustment & Oper.Range Fifteen turns for 0-10, 0-30, 0-60, 0-100, 0-150 or 0-200 psig output range Materials of Construction Body Standard: Aluminum; Optional: 316 Stainless Steel Bonnet Aluminum Valve Seat Valve SeatValve Seat Standard: Brass; Optional 316 Stainless Steel Valve Stem Valve StemValve Stem 316 Stainless Steel Diaphragm DiaphragmDiaphragm Reinforced Buna-N, Viton-A® fluoroelastomers Range Spring Music Wi Range Spring re, zinc plated Filter 40 Filter micron, 316L Sintered Stainless Steel with Viton fluoroelastomers or Buna retainer sleeve
Send Inquiry to This Supplier
You May Also Like
-
FANN 35SA Viscometer Upper Drive Shaft 207545US$ 50 - 55MOQ: 1 Piece
-
Test Products International Inc TPI 9080 Vibration Analyzer Vibration MeterNegotiableMOQ: 1 Piece
-
MALEMA Flow Switch M-200X-S63-004 Adj, 316SS, 3/4" FNPTNegotiableMOQ: 1 Piece
-
Electronic Data Devices Turbine Flow Meters 5.0750H EDD 3/4" x 1"Hex Body Thread MetersUS$ 150 - 200MOQ: 1 Piece
-
FANN Drilling Fluids & Oil Well Cements Maniflod Dual HPHT Filter Press 209545 Regulating ValveUS$ 10 - 20MOQ: 1 Piece
-
FANN Instruments Drilling Fluids, Testing MeterUS$ 200 - 205MOQ: 1 Piece
-
Fann Drilling Fluids & Oil Well Cements 209545 Mnifold Dual HPHT FilterpressUS$ 1500 - 1600MOQ: 1 Piece
-
EDD (Electronic Data Devices) 5.1500 EDD 1 1/2" x 1 1/2" THREADED METERUS$ 100 - 100MOQ: 1 Piece
-
FANN Model 35 Viscometer 10095275US$ 2 - 3MOQ: 1 Set
-
MD TOTCO 6" Gauge Back MT Single Pointer 10128328-039 15000psiUS$ 1000 - 1050MOQ: 1 Piece
