Contact Platform Support
Help CenterCommercial Shrimp Chips Production Line|Prawn Crackers Making Machine
Related Products
-
Shrimp Production Line|Prawn Crackers Making MachineNegotiableMOQ: 1 Set -
Shrimp Cracker Production Line|Prawn Cracker Making MachineNegotiableMOQ: 1 Set
-
High Efficiency Prawn Crackers Processing LineNegotiableMOQ: 1 Set
-
Fully Automatic Shrimp Cracker Production LineNegotiableMOQ: 1 Set
-
Commercial Shrimp Chips Production LineNegotiableMOQ: 1 Set
Commercial Shrimp Chips Production Line|Prawn Crackers Making Machine
Shrimp Chips Production Line Introduction:
Shrimp chips, also named prawn crackers, shrimp crackers, krupuk, is a kind of deep-fried snack made from shrimp and starch, popular in East Asian cuisine.
Purpose and Scope of Use of Shrimp Chip Making Machine:
This shrimp cracker making machine is special equipment for shrimp crackers production, this machine has stable performance, wide applicability and the required less operators etc, mainly use corn starch, rice and potato starch as raw material, produce different type of prawn crackers.
Installation and Use of Shrimp Cracker Production Line:
1.Before using curing machine, add the oil 2 liters to gear box.
2.The machine should be installed on the flat solid concrete ground.
3.Check the machine parts is complete, the bolt is strong.
4.Confirm the parts in good condition, connect power, make the machine idle run for 2-3 minutes, no other exceptions, begin to work.
5.Pour mixed starch raw material into feeding machine inside the bucket, running for 1 to 2 minutes until temperature in cylinder rise, and then adjust the feeding machine speed.
Maintenance of the Shrimp Crackers Making Machine:
1. The shrimp crackers making machine shall inject oil into the bearing box on time.
2. Check and check the machine every day during work.
Whether the bolt is loose, oil seal oil leak.
3. After each work is finished, the waste material must be cleaned.
Commercial Shrimp Chips Production Line Parameters:
| MODEL & NAME | SPECIFICATION |
|
Mixing machine |
Power: 3.0KW Capacity: 30kg/time/10min Size: L750*W810*H950mm |
| Extruder |
Power:18.5KW Cylinder Dia.: 100mm Capacity:80-120kg Size:L1850*W810*H1950mm |
| Re-extruding and shaping part |
Power:4KW Mold size: Can be customized Size: L850*W540*H790mm |
| Cutting machine |
Power: 3.55KW Size: L1050*W610*H750mm |
Contact Us
Email: ellie@machinehall.com
Whatsapp:+8618595717505
Skype: leo.liufan
Send Inquiry to This Supplier
You May Also Like
-
High Quality Powder Mixing MachineNegotiableMOQ: 1 Set
-
Shrimp Crackers Slicing MachineNegotiableMOQ: 1 Set
-
High Quality Shrimp Chips Curing MachineNegotiableMOQ: 1 Set
-
Shrimp Cracker Production LineNegotiableMOQ: 1 Set
-
Commercial Shrimp Chips Production Line|Prawn Crackers Making MachineNegotiableMOQ: 1 Set
-
Continuous Peanut Frying Machine|Peanut FryerNegotiableMOQ: 1 Set
-
Commercial Banana Cutter Machine|Plantain Slicer MachineNegotiableMOQ: 1 Set
-
Potato Chips Blanching MachineNegotiableMOQ: 1 Set
-
Automatic Peanut De-oling MachineNegotiableMOQ: 1 Set
-
Chicken Frying Machine|Vegetable and Fruit Chips Frying MachineNegotiableMOQ: 1 Set
