Home > Products > Bridge tensioning equipment > Wholesale Anchor Cable Pushing Machine
Wholesale Anchor Cable Pushing Machine
- 1000 Set / Sets per Month
- shanghai
- T/T L/C
- 30 days
Product Details
Brand Name: | zhongtuo | Place of Origin: | China |
Product Description
Description of strand pusher machine:
PC strand pusher machine
1. LS strand pusher machine can push oc strand continuously .
2. It has the features of easy operation, reliable performance, efficiency significantly.
3. The machine reduces the labour, and widely used for large-scale bridges, and constitutive objects.
4. High performance with good quality
5. It is the main tool of through strand in building bridges and large building with Prestressing work.
The use method of the post tension strand pusher:
1. Prepare for work before opening the machine
(1) check whether the electrical circuit is in good condition and check the position of the oil surface in the reducer.
(2) check the direction of the motor moving, whether it is in the direction of the arrow on the shell.
(3) the power supply is connected and the debugging is determined to be positive and reverse.
2. Normal work
(1) insert the steel hinge line of the good rack from the inlet of the machine, point the button switch into the line, make the steel hinge line slowly penetrate into the machine, run along the pipe into the reserved channel and go to the other end to reach the reserved tension dimension, and use the hand-held sand turbine to cut off.
(2) when the conveying distance is not enough, the upper rotor wheel can be adjusted to meet the working requirements, but it cannot be adjusted too tightly, so as to avoid the wear and reduce the service life of the roller when running.
(3) when working, pay attention to the normal operation. When any fault is found, the machine should be stopped immediately to find out the cause and restart it after the failure.
Method of use of post tension strand pusher:
1, before starting preparations
(1) check the electrical lines are in good condition, check the location of oil in reducer.
(2) check the motor rotation direction is consistent with the arrow mark, the machine direction.
(3) the power supply is switched on, to determine a good reversible debugging.
2, the normal work
(1) will play good shelf steel hinge line from machine line inserted into the mouth, to move into the line button switch, the steel hinge line slowly penetrates into the machine, along the catheter into the reserved channel to the other end penetrates reach reserved tension size, with a hand-held sand turbine cut off.
(2) when it is not up to the transmission distance, can adjust machine plexus wheel pressure spring screw to work the required date, but can not be adjusted too tight, so as not to run when intensified pressure wheel wear, reduce the using life.
(3) work, pay attention to the operation is normal, when found any fault, should immediately stop, to identify the reasons for troubleshooting after restart.
Contact Us
- Shaanxi Zhongtuo Mine Equipment Co.,Ltd
- Contact nameJessie hu
- Phone86-029-62322708
- AddressNo.27, Beichen Village Industrial Park, Weiyang District, Shaanxi Province Xi'an,Shaanxi
- Wholesale hydraulic crawler drill machine
- Wholesale Coal Mine Drill Rig Rock Bolt Drill
- Wholesale blast hole drilling machine
- Wholesale Rock Drill Jack Hammer
- Wholesale scarifying machine uses
- Wholesale concrete floor grinder polisher
- RebarConstruction Machinery Upset Forging Parallel Thread Machine
- Rock Drill Splitter Used In Various Demolition Work
- Piston Hydraulic Rock Splitter Equipment
- Air Leg Rock Drill Worked With Air Compressor
- QD-100 Pneumatic DTH Drilling Rig
- MQT-130 Pneumatic Roof Bolter with adjustable leg
- Pre-Stressing Multi Holes Round Wedge Anchorage
- PC Strand Pusher Machine In Promotion|Factory Price
- High-Pressure Grouting Machine|Chemical Grouting
- Concrete Scarifier
- Cement Mortar Spraying Machine Automaticly
- Portable DTH Drill Worked With Air Compressor
- Radii And Spiral Bending Machine factory price in promotion
- Rebar Threading Machine For Cutting And Rolling|factory price
- Rebar Cold Extrusion Machine With Press Connecting|factory price in promotion
- Multi Strand Jack Lifting System|capacity with 15-560tons
- Post tensining hydraulic jack with multi strands stressing|factory price in promotion
- Pre-stressing Multi Holes Round Wedge Anchorage|factory price in promotion
Popular Searches
- Rear Idler
- daemo hydraulic breaker parts
- mitsubishi bulldozer parts dealer
- excavator throttle cable
- hydraulic track link press
- Outer Bushing
- kobelco wiring harness
- caterpillar throttle cable
- hydraulic track pin press
- equipment for transplant trees
- zf wg200 transmission
- zf 6wg200 transmission
- zf transmission 6wg180
- nachi pvd-1b-32p piston pump
- excavator machinery parts
- portable track pin press
Find Similar Products By Category
- Machinery > Engineering & Construction Machinery > Construction Machinery Parts
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Jessie hu
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-