LE800 Smart Electromagnetic Flowmeter
LE800 Smart Electromagnetic Flowmeter
LE800 Smart electromagnetic flowmeter is a kind of induction instrument, based on Faraday’s law of electromagnetic induction, used for volume flow measurement of conductive medium. It also can be used for volume flow measurement of acid alkali and other strong corrosive liquids and slurries, pulp, paper pulp and other homogeneous liquid-solid two-phase suspension liquid. Application of single chip technology implements digital excitation. It also adopts CAN filed bus protocol. It can display in site and putout 4-20mA digitals for record, calibrate and control. It is widely used in industries in line of petroleum, chemical, metallurgical, environmental protection, medical, textile, paper making, food industry and municipal management, flow measurement of water conservancy construction, river dredging and other areas.
Features :
Medium : conductive liquids, conductivity more than 5μs/cm.
Good anti-interference, resistance to corrosion, wear resistance, range re-settable in site ( within span). LCD display, high accuracy.
Specifications:
Range ratio: 150:1
Signal: 4-20mA, RS485, RS232, Hart, Modbus
Load resistance: 0-500Ohm
Ambient temperature: -10 to 50C
Accuracy: 0.5%, 1%
Medium temperature:
Normal rubber lining: -20 to 60C
High temp rubber lining: -20 to 90C
Teflon lining: -30 to 100C
High tempTeflon: -30 to 180C
Nominal working pressure:
DN10 to DN65: 2.5Mpa
DN80 to DN150: 1.6Mpa
DN200-1200: 1Mpa
DN700-DN3000: 0.6Mpa
Electrode material: stainless steel, Ti, Tantalum, Hastelloy.
Protection class: IP65, IP68
Power supply: 220VAC, 24VDC, 3.6V lithium battery
Straight pipe length: pipeline: up steam: more than 5DN; down steam: more than 2DN.
Connection type: for electromagnetic flowmeter: pipeline installation. Flange connection with pipings.
Flange connection size is conform to GE9119-88.
Model & Ordering guide
LEF800 |
Smart Electromagnetic Flowmeter |
|||||||||||
Tube material |
A |
Aluminium |
||||||||||
C |
Carbon steel |
|||||||||||
S |
Stainless steel |
|||||||||||
DN |
*** |
10-2200mm (please write directly) |
||||||||||
Combination form |
1 |
Integration |
||||||||||
2 |
Split |
|||||||||||
Electrode material |
S |
Stainless steel |
||||||||||
T |
Ti |
|||||||||||
D |
Ta |
|||||||||||
H |
Hastelloy |
|||||||||||
P |
Pt |
|||||||||||
N |
Ni |
|||||||||||
Output |
N |
NO |
||||||||||
1 |
4-20mA/1-5KHz |
|||||||||||
2 |
4-20mA |
|||||||||||
Lining material |
RB |
Rubber |
||||||||||
PF |
PTFE Polytetrafluoroethylene |
|||||||||||
JX |
Polymethylene |
|||||||||||
JS |
polyurethane rubber |
|||||||||||
Local display |
0 |
No |
||||||||||
1 |
Local display |
|||||||||||
Communication |
NA |
No |
||||||||||
R4 |
RS485 |
|||||||||||
R2 |
RS232 |
|||||||||||
M0 |
Mobdus |
|||||||||||
HA |
Hart |
|||||||||||
Ground connection |
0 |
No |
||||||||||
1 |
With a ground loop |
|||||||||||
2 |
With ground electrode |
|||||||||||
Maximum = flow |
*** |
Write the max. Flow range m3/h |
||||||||||
Tube connection |
F |
Flange |
||||||||||
T |
Thread |
|||||||||||
Liide Technology & Equipment CO, Ltd
Hong Kong, China
Contact person: Amanda
Mobile Phone: +86 15349210324 Email: Amanda@liidetech.com
Send Inquiry to This Supplier
You May Also Like
-
LT800 Gas Turbine FlowmeterUS$ 498 - 850MOQ: 1 Piece
-
LT800L Liquid Turbine FlowmeterUS$ 498 - 850MOQ: 1 Piece
-
LE800C Clamp Type Smart Electromagnetic FlowmeterUS$ 385 - 615MOQ: 1 Piece
-
LE800G GPRS Remote Electromagnetic FlowmeterUS$ 385 - 615MOQ: 1 Piece
-
LE800I Input Type/Plug-in Smart Electromagnetic FlowmeterUS$ 385 - 615MOQ: 1 Piece
-
LE800S Split Type Anti-corrosive Smart Electromagnetic FlowmeterUS$ 385 - 615MOQ: 1 Piece
-
LV800FC Flange Clamp Vortex FlowmeterUS$ 385 - 615MOQ: 1 Piece
-
LV800P Plug-in Vortex FlowmeterUS$ 385 - 615MOQ: 1 Piece
-
LV800S Split Type Vortex FlowmeterUS$ 385 - 615MOQ: 1 Piece
-
LT800P PE Material Anticorrosive Turbine FlowmeterUS$ 498 - 850MOQ: 1 Piece