electrostatic powder spray equipment

electrostatic powder coating machine Colo-500-PGC1

the powder gun through the powder hose . The powder is electrostatically

charged at the nozzle of the gun. In addition, an electrostatic field is

created between the gun nozzle and the grounded object. The charged

powder spray remains adhered to the surface of the object.

The powder is fluidized by air forced through a porous plastic plate from

below. The powder acquires, thereby, fluid-like characteristics.

The conveying air, supplementary air, and rinsing air are set on the control Unit

Technical Data 

Power range                                   220v/110v

Frequency                                     50/60HZ 

Temperature range in use                      -10 ℃+50 ℃

Powder Gun 

Gun weight:    ………………                    500G

Rated output voltage ………                      24VDC

Input voltage     ……………                       - 200kv

Maximum output current  ………                   180Ua(max)

Maximum output voltage…………                   0-100KV (  adjustable)    

Maximum powder injection :………                    600g/min 

Polarity ………………                                negative (-)   

Pneumatic technical spec 

Maximum input-air pressure …………..                 8kg/cm 

Optimum input-air pressure……..                        6kg/cm 

Minimum input-air pressure   ……                      4kg/cm 

Maximum water vapor content or compressed air …..      1.4g/N m3  

Maximum oil vapor content of compressed air   ……..     0.1ppm

Maximum cimpressed-air consumption………            13.2 m3/h

welcome to visite our veb site: /