B3/8BDM-5,5 nozzle,BDM hollow cone nozzle

B3/8BDM-5,5 nozzle,BDM hollow cone nozzle

【YBS Nozzle】offer B3/8BDM-5,5 nozzle,BDM hollow cone nozzle and other products.Tel:86-0769-81609791

BDM hollow cone nozzle is designed for the mine industry, BDM has recessed orifice area which protect from demage.The self locking cap can provent  loss due to  vibration, fiberglass-reinforced nylon inlet body.

nkjet printers in the course of a hollow cone nozzle clogging problems , mainly in the "prevention ." To keep the hollow cone nozzle in top working condition

The best way is a hollow cone nozzle on your daily to do some proper and effective maintenance, it will greatly reduce the likelihood of nozzle clogging ,Therefore, please read the following carefully and refer to the operation .?One . After the equipment is installed, as well as equipment to enable the early maintenance hollow cone nozzle maintenance??1 . To make a hollow cone nozzle into the best working condition , before the official start to undertake the production of business equipment , be sure to use 1 to 2 days time to make the mostMay print some big multi- screen display is best CMYK4 colors are used , but must be coupled with C, M, Y in the two sides of the screen , K4 color color bar?2 . Completely decisive and timely treatment nozzle for holding the nozzle clogging minor optimum condition in the printing process time is very important3 . In addition, it is necessary to carefully check the hollow cone nozzle clogging the nozzle case and find the reason .

?Four . Treatment of clogged nozzles frequently occurs in the printing process?1 . Press the PAUSE button to pause printing job, and then press the PURGE key to move the carrier to wash the leftmost position .?2 . Keep the device power is turned on , connected to the sub tank level sensor signal line head control board all unplugged?3 . The hollow cone nozzle ink supply tube on ( from the sub tank ) pulled out , and then extract special cleaning fluid to clean the glass syringe with a hollow cone

Ordering information of BDM hollow cone nozzle(YBS brand)

Materials：removable cap and nylon body

3/8 B3/8BDM-2-0.5

B3/8BDM-2-1

B3/8BDM-2

B3/8BDM-3-2

B3/8BDM-3

B3/8BDM-5

B3/8BDM-10-2

B3/8BDM-20-10