floor cleaning machine

shot blasting machine:

Shot blasting is a cost-effective and environmentally friendly method for preparing concrete and steel surfaces. This labor and time-saving process strips, cleans and profiles simultaneously.

It leaves the surface immediately ready for application of coatings or overlays-eliminating drying time and costly disposal procedures associated with other preparation methods. Shot blasting is the preferred method of surface preparation, recommended by most coating manufacturers. It produces excellent bonding characteristics that reduce coating failure and maximum floor life. 

 Road surface shot blasting machine working conditions:

1, face uneven degree <20mm; stagnant water and relatively dry; slope <25 °

2, Ambient temperature: -20  degrees to 60 degrees ; steel surface temperature is greater than the dew point of at least 3  degrees

3. humidity:

 a :steel surface blast when the relative humidity is greater than 90%

 b: concrete shot blasting relative humidity less than 95%

4, elevation: 0 ~ 3000m; may not be in operation in the rain and snow)

How it works:

Shot material in the lower part of separation box is from the feeding tube into the blasting components and driven by the motor. The high-speed rotating shot will be thrown and stroke against the surface of workpieces at the speed of 80m/s. And thus carry out clean-up operation. Under the effect of negative pressure, the shot abrasive and dust will be back into sand separation box where the shot, dust and impurities will be separated completely. Good shot materia into the blast is expected to continue to use.

where is it work:

It  Is used to improve the asphalt road surface roughness and friction coefficient, thereby improving the adhesion of the road to ensure traffic safety. At the same time, the asphalt pavement fixtures (such as fuel, oil, etc.) are nowhere to hide, and thus can improve the sliding performance of the pavement              City road pavement can be used shot blasting machine for cleaning, removal of road signs and markings on the busy intersection, the road can be galling to improve the road surface roughness and friction coefficient. Reduce the road construction. Road, therefore, shot blasting machine for the supporting role of the urban construction are one step closer to our lives standardized facilitation.

packaging:

They are separately packed in wood pallet free of fumigation with plastic film outside.

After-service:

They come with a one year warranty and of course.Spare parts will be supplied when needed.we provide technical support by phone call or Coaching By Walking Around.More details ,please contact us!