Steel Material Hydraulic Pipe Cutting Machine Easy Operation 51.5kgs

Pipe Cutting and beveling Machine:

The series machine is ideal for all types of pipe cutting, beveling and end preparation. The split frame design allows the machine to split in half at the frame and mount around the OD of the in-line pipe or fittings for strong, stable clamping. The equipment performs precision in-line cut or simultaneous cut/bevel, single point, counterbore and flange facing operations, as well as weld end preparation on open ended pipe, Ranging from 2” to 48” O.D.(DN50-1200), on most wall thicknesses and material.

Cold Cutting and Beveling improve safety Cutting and Beveling simultaneous Split Frame: easy mounted on pipeline Self-acting tools feed Fast, Precision, In-situ Beveling Minimal Axial and Radial clearance Light weight and Compact design Easy install & Operation Pneumatic or Electric or Hydraulic driven Machining heavy-wall pipe from 2” up to 48”

Application

Specification

Drive Options: Pneumatic, Hydraulic, and Electric Air requirement: 1500L-3000L /Min@0.6/0.7Mpa Hydraulic requirement: 2-60L per minute 12.5Mpa Electric requirement:220-240V 1PH 50/60HZ Feed mode: Star wheel, automatically Feed rate: Fixed 0.08mm per circle

Selection Guide

Model	Working Range (OD)		d (mm)	D(mm)	L (mm)
	Inch	mm
168	2”-6”	50-168	185	512	178
230	3”-8”	80-230	236	564	178
275	5”-10”	125-275	283	612	178
325	6”-12”	168-325	334	665	178
377	8”-14”	219-377	386	719	178
426	10”-16”	273-426	438	776	180
457	12”-18”	300-457	469	807	180
508	14”-20”	355-508	518	862	190
560	16”-22”	400-560	570	910	190
610	18”-24”	457-610	618	960	190
660	20”-26”	508-660	670	1020	190
715	22”-28”	550-715	719	1084	190
762	24”-30”	600-762	770	1134	190
830	26”-32”	660-813	830	1194	192
914	30”-36”	762-914	924	1296	212
1066	36”-42”	914-1066	1077	1468	212
1230	42”-48”	1066-1230	1248	1646	212

Suggest: size 1066 and above size select and use hydraulic type

Order Guide

Before you place order to us, please let us know the following information:

Choose suitable Model

Confirm electric power supply ( Voltage, frequency and phase)

Confirm the beveling angel needed

Confirm the welding joint required (U, V, Double V or Compound preparation)

Advise your pipe material ( Carbon steel, stainless steel or others)

Other special demands about machine

The spare parts required

If the pipe wall thickness m