Contact Platform Support
Help CenterEnergy-efficient High - Concentration Pulping Machine
Related Products
1. This equipment is suitable for chemical pulp, semi-chemical mechanical pulp, cold soak method of high yield and fiber grinding, the forced feeding system, whether trees, sex differences of slurry, or the remaining leftover material after timber processing, wood shavings, pulp residue and the quenching reed pieces, such as rice and wheat grass, cotton stalk, can with high rotating speed, the appropriate grinding gap separation become high-quality fiber. It is especially suitable for raw materials such as rice straw and cotton rod, semi-chemical mechanical pulping, and can also be used for the high concentration of slurry of other slurry.
High concentration pulping machine is used to treat high concentration slurry, such as chemical pulp, semi-chemical pulp, mechanical pulp, block slurry, etc.
2. Strong adaptability of the equipment and wide range of size: it can be used for the normal pressure and high grout of grass material, Yang wood chemical slurry, eucalyptus wood pulp, reed pulp and sugarcane pulp; Little cut off of the fibers, remarkable effect, improve the fiber run higher degrees, softness, plasticity and internal fibrosis, the most suitable for the short fibre, low intensity of beating broadleaf wood and straw, fiber raw material, for the production of high strength, high performance, the paper raised the new way, compared with the traditional use of beater and plate mill have obvious advantages:
(1) energy saving: the consumption of tons of pulp is 30% ~ 40%.
(2) environmental protection: tons of plasma can save more than 50% of electricity.
(3) high efficiency: the physical strength of pulp fiber increases by 10% to 35%.
3. The machine adopts reasonable process and mechanical design, optimized grinding sheet design and combination, by spiral feed; Equipped with an independent hydraulic/lubrication station to implement the flexible blade operation, the lubrication system is fully lubricated and cooled to the main bearing. Manual worm gear tuning mechanism for precise control of disk clearance. The machine is easy to operate, stable and reliable, beautiful appearance.
Send Inquiry to This Supplier
You May Also Like
-
TSM Series Coarse Tailings ScreenNegotiableMOQ: 1 Piece -
TST Series Fine Tailings ScreenNegotiableMOQ: 1 Piece
-
RewinderNegotiableMOQ: 1 Piece
-
Single Effect Fiber Separator Machine Screen PlateNegotiableMOQ: 100 Pieces
-
Hydrapulper Screen PlateNegotiableMOQ: 1 Piece
-
Wedge Wire Screen CylinderNegotiableMOQ: 1 Piece
-
Drilled Screen CylinderNegotiableMOQ: 1 Piece
-
SCS Series New Liters Flow Pressure Thick SieveNegotiableMOQ: 1 Piece
-
STN Series Inflow Pressure ScreenNegotiableMOQ: 1 Piece
-
JS Series Outflow Pressure ScreenNegotiableMOQ: 1 Piece
