Economic EPS Wall Truck Dry Paint Booth , Spray Paint Room With Galvanized Steel Roof

Delivery Time:10-15 working days
Certification:CE, TUV

Economic EPS Wall Truck Dry Paint Booth , Spray Paint Room With Galvanized Steel Roof

Features

1. Booths are constructed from 18 gauge, prime-quality galvanized steel

2. All panels are tongue and groove interlock structure

3. Quality brand-name turbo fan

4. Industry-leading light levels

5. Spray booth specific, dual voltage 36-watt light fixtures

6. Booths include installation instructions, fan, motor and drive, fasteners, hardware, and sealant necessary for assembly

7. Control panel and other electric components can be purchased separately

8. Pneumatic damper for spraying to baking cycle.

Advantages

In painting, outside fresh air comes into the heating generators through the pre-filter system, and enters into the plenum, then filtered by ceiling filter and into the both which brings clean,

symmetrical and steady-going down airflow for spraying,After painting, hot air goes from heating

generators to plenum, then enters room after filtered by ceiling filter, providing heat that is necessary for baking of cars surface. Afterwards, the air with little benzene will be released to the atmosphere after being filtered one time by the exhaust air filter.

This model standard spray booth makes good effect in painting and baking,with a economic price,and can provide a good environment for workers.

Item	Detailed Specification
Inside dimension	6900×3900×2650 mm (L×W×H)
Outside dimension	7000×5200×3400mm (L×W×H)
Front door	Folding door, 3 folds, 3000×2600 mm (W×H), without frame, aluminium alloy window frame, orange colour, door head and two batten on both sides white colour.
Emergency door	1 units, 650×1800mm (W×H), colour: white.
Basement	Galvanized steel assemble, 300mm high, galvanized steel support, 2 rows grilles made by flat bar and twisted steel, silver colour, 3 rows indented plate, silver colour, 2 ramps, 520×2000mm/pc, silver colour.
Wall panel	Thickness: 50mm, width:1150mm, tongue and groove structure, 0.376mm colour steel with EPS inside, colour: white.
Light	Ceiling Lights: 8Units×4Pcs=32Pcs×36W, no side lights, with LED, lighting boxes are powered coated.
Generator cabinet	Intake from back upper, exhaust from rear upper, galvanized steel frame; orange machine-made panel covered, filled with heat preservation material inside.
Intake and Exhaust system	Inlet:1×5.5KW turbo fan, air capacity for each fan: 21000m3/h.
	Outlet: optional, 4m ducts, 1 pcs 900 bend.
Heating system	BT18 diesel burner, stainless steel heat exchanger, pneumatic damper actuates from spraying to baking cycle. Max. heating productivity: 180000kcal/h, max temperature: 80℃, 4pcs chimney, 1 pcs bend.
Purification system	Pre-filter, ceiling filter, fibreglass filter.
Roof	Galvanized steel
Control system	Spraying, heat spraying, baking, time setting, lighting switch, failure indicator, thermostat, power supply switch, emergency stop, all motors is normal start.
Total power	7.5KW (Power supply 1×220V, 3×380V, 50HZ)