Heat Recuperation Standard Paint Spray Booth , Car Painting Chamber With LED Light
Certification:CE, TUV
Heat Recuperation Standard Paint Spray Booth , Car Painting Chamber With LED Light
Features
1. With heat recuperation system, energy save and more efficiency.
2. 0.6mm coated steel with rock wool inside for wall panel.
3. Quality brand name turbo fans, directly drive type
4. Riello RG5S diesel burner with a heating productivity of 260000Kcal/h
5. Pneumatic damper for spraying to baking cycle.
6. Double layer heat exchanger.
7. Siemens motors.
8. Electric damper for intake and exhaust, control the air flow.
Advantage
In painting, outside fresh air comes into the heating generators through the pre-filter system, and enters into the plenum, then filtered by ceiling filter and into the both which brings clean,
symmetrical and steady-going down airflow for spraying,After painting, Hot air goes from heating
generators to plenum, then enters room after filtered by ceiling filter, providing heat that is necessary for baking of cars surface. In the meantime, heat recuperation system start working,energy save and temperature raise fast. Afterwards, the air with little benzene will be released to the atmosphere after being filtered twice by the exhaust air filter.
| Item | Detailed Specification | |||||||
| Inside dimension | 7000×4000×2800 mm (L×W×H) | |||||||
| Outside dimension | 7120×5520×3750mm (L×W×H) | |||||||
| Front door | Folding door, 3 folds, 3000×2750 mm (W×H), without frame, square window frame, orange colour, door head and two batten on both sides white colour, with safety escape door lock. | |||||||
| Emergency door | 1 units, 800×2000mm (W×H), colour: white, with safety escape door lock. | |||||||
| Basement | Galvanized steel assemble, 350mm high, galvanized steel bending support, full grilles made by flat bar 30×5 and twisted steel, galvanized, 3 ramps, 900×2500mm/pc, silver colour. | |||||||
| Wall panel | Thickness: 60mm, both sides covered by coated steel, thickness 0.6mm, with rock wool inside, colour: white. | |||||||
| Light | Ceiling Lights: 8Units×4Pcs=32Pcs×36W, both sides lights: 7Units×4Pcs=28Pcs×36W, back side lights: 4Units×4Pcs=16Pcs×36W, LED light tube. | |||||||
| Generator cabinet | Intake from back upper, exhaust from rear upper, galvanized steel frame; white powder coated panel covered, filled with heat preservation material PU inside. | |||||||
| Intake and Exhaust system | Inlet: 1×7.5KW turbo fan, Siemens motor, air capacity for each fan: 25000m3/h, electric damper. | |||||||
| Outlet: 1×7.5KW turbo fan, Siemens motor, air capacity for each fan: 25000m3/h, electric damper. | ||||||||
| Heating system | Italy RIELLO RG5S diesel burner, double layer stainless steel heat exchanger, pneumatic damper actuates from spraying to baking cycle. Max. heating productivity: 260000kcal/h, with heat recovery system. | |||||||
| Purification system | Pre-filter (pocket type), ceiling filter, fibreglass filter, activated carbon filter (pocket type) | |||||||
| Roof | 50mm rock wool panel. | |||||||
| Control system | Spraying, heat spraying, baking, time setting, lighting switch, failure indicator, thermostat, power supply switch, emergency stop, pressure gauge, all motors reduced-voltage starting. | |||||||
| Total power | 17KW (Power supply 1×220V, 3×380V, 50HZ) | |||||||
Send Inquiry to This Supplier
You May Also Like
-
Auto Parts Exhaust Manifold 3979211US$ 1 - 50MOQ: 1 Piece
-
EX5 New Exhaust , NEW EX5 MufflerNegotiableMOQ: 1 Piece
-
Exhaust [CNC] New Design] Used Dirt BikeNegotiableMOQ: 100 Sets
-
KK118 40 300C Hot Sale Flexible Exhaust Pipe for PrideUS$ 1 - 5MOQ: 500 Pieces
-
CAT NozzleNegotiableMOQ: 1 Pair
-
High Quality Custom Exhaust Header Cnc Machining Exhaust HeaderUS$ 0.1 - 20MOQ: 100 Pieces
-
Forklift Exhaust PipeNegotiableMOQ: 5 Pieces
-
2014 Stainless Steel Exhaust Muffler Tail Pipe for XC90US$ 1 - 59MOQ: 5 Sets
-
Turbo Exhaust ManifoldUS$ 6.1 - 10MOQ: 10 Pieces
-
Toyota Hiace Regius ACE 2005-2016 Engine Air Intake Pipe HoseUS$ 4.3 - 8.8MOQ: 60 Pieces