NJP-2 Model 1000A/B/C Fully Automatic Capsule Filling Machine

1.Main Technical Parameter:

1)Output:1000 capsules/min

2)No.of segment bores:8

3)Suitable for capsule:00#~4#.

1)  It has been improved the inner design turret,and imports beeline bearings for each machine from Japan directly,so that it can be sure a longer usage-life and precision of machine.

2)The working station cam runs under the good lubricating condition,and maintains the inner lubrication of cam slot to a full extent,increasing the pressure pulverization oil pump,thus extends the operation life of  the spare parts.

3) It is controlled by the computer,has a stepless timing with the frequency-conversion, the numeral showing makes an easy operation and clear appearance.

4)The multi-bore dosing brings a precision dosage (it is controlled around 3.5%);the good capsule applicability makes a higher capsule qualified rate (more than 99%).It can be filled with the Chinese traditional medicine and the Western medicine.

5) It has a protector equipment for the operator and the machine.It has a automatic pause equipment when  it is lack for the material.It has a steady and safe working,it is the best choice for the hard capsule made factories.

3.Packing:

1)Standard sea worth wooden packing.

2)One wooden case is including:one set machine with one set mould,one set water tank,one set vacuum pump,one set dust collector.

3)Packing size:1.05*1.8*2m

4)Packing weight:1050kgs

4.Capsule's turn back process:

When the machine starts,the capsules in chute will come into the selection fork of distribution device vertically one by one;when the selection fork runs down ward,it will send a row of capsules into slot.Through the directional push of fiddle fork and the operation of selection fork,each capsule will be installed in module hole,pressing the cap with upper body lower.