Bench Center
The radial bound of the gear ring ?Fr, within one rotation of the gear, the testing header is in the grooves or on the gear, and touch the both sides of the high and middle part of the groove, and the testing header shall point to the axle of the gear. Therefore, the radial bound inspection is performed according to the testing header of original shape of the groove. The sketch shows the theory indication of this tester. During the test, fix the tested gear installed on the axle between the two probes of the tester, and insert the testing headers with original groove shape into the grooves of the gear in order. Then the bound status of the testing header to the rotation axle of the gear shall be indicated.
Send Inquiry to This Supplier
You May Also Like
-
Air-cooled Screw ChillerNegotiableMOQ: 10 Pieces
-
Industrial ChillerNegotiableMOQ: 2500 Sets
-
HIROSS High Quality Air Cooling Machine System Industry Water Cooled Low Temp ChillerNegotiableMOQ: 1
-
2015 New Design in Vending Machine Water ChillerUS$ 1 - 9,999MOQ: 1 Set
-
Small Size Aquarium Heat Exchanger Seawater Heat ExchangerNegotiableMOQ: 1 Piece
-
Strong Construction High Eer Industrial ChillerUS$ 1,000 - 25,000MOQ: 1 Set
-
Feiyide Industrial Air Cooled Chiller for Chrome Silver Electroplating MachineUS$ 500 - 3,000MOQ: 1 Set
-
Industrial Chiller for Water CoolingUS$ 630 - 800MOQ: 1 Unit
-
Modular Heat Recovery Air Cooled ChillerUS$ 5,000 - 5,000MOQ: 5 Units
-
Counter Flower CoolerNegotiableMOQ: 1 Set