OBV6 series surge protection device for lightning protection

DC surge protector, DC lightning protection, Solar lightning system

Product Description

Installation instructions

1. You must cut off the power supply before installation, live line work is strictly prohibited.

2. In protecting front line fuse or automatic circuit breaker. 

3. Protector for the parallel installation, Kevin connection is recommended (for Kevin wiring convenience, operates two terminals on the module, which is a straight up. Kevin v-like connection is a connection. A contact point and the two lines in parallel, one into, a calculated). Connector requires solid and reliable, and short, thick and straight. 

4. When installed according to the installation diagram shows the connection, where l (L1, L2, L3) for the line, n is neutral, PE ground wire, do not mistake. After the installation is complete, check that the protection unit is plug in place, close the automatic circuit breaker (fuse) switch, check the working status is normal.

5. Protector in use during the fault display window should periodically verify and view state when red fault display window or remote Terminal outputs alarm signals, the protector fails, should be repaired or replaced in a timely manner. 

Excellent Quality:

We approvals of CE,CB,UL,ETL,CCC and ISO9001 Quality System Certificate etc.Products being popular around the world,such as Europe,America,Southeast Asia,Middle East,Africa,etc.

Competitive Price:

OEM or ODM projects are fully accepted,with the quantity added step by step,the discount will be good.

Fast Delivery:

With the projects or order received,the order must to be discussed in the R & D section about 2 days to deal with the parameter,then pass the order to the production section.

After-sales Service:

All kind of products have quality guarantee,also after-sales worker 24h on line to solve the questions.