Home > Products > Phosphating Agent > Compound silane ceramics Phosphating Agent for steel surface treatment
Compound silane ceramics Phosphating Agent for steel surface treatment
- 0 Piece / Pieces per Month
- T/T L/C D/P D/A
- 7 days
Product Details
Brand Name: | NFCase | Place of Origin: | China | Model Number: | AIA-1 |
Product Description
Certification:CE,FCC,MSDS
Suitable for surface treatment for cold rolled plate,galvanized sheet,aluminum,aluminum alloy,Zn-aluminum,iron.
Brief Introduction |
JH-8001 is composite silane vitrification agent containing zirconium salt,silane ingredient,applicable for surface pre-treatment for galvanized sheet,aluminum,aluminum alloy,zinc alloy and steel etc.This treatment can replace the metal parts of iron phosphating,zinc phosphating and chromium phosphating process.This product does not contain volatile content, after the treatment can enhance the metal surface coating adhesion and corrosion resistance, have the effect that reduce costs, improve production efficiency. This product can be used for spraying or immersion treatment process. This product suitable for dipping oil immersion process. |
Preparation of tank liquid |
1) Before adding this agent,to ensure that the tank cleaning,residue free,and check no nozzle clogging,angle is correct.Deionized water conductivity should be less than 30μS/cm. 2) Add 40-60kg film forming agent in every 1000 tank liquid. 3)Tank liquid PH value between 3.8-4.8 In order to save cost and improve the stability of products,we suggest customers to add the agent,and monitoring the PH at the same time. |
control parameter |
Deionized water:electrical conductivity <30μS/cm;Cl-<10ppm Processing time:3-5min Temperature Room temperature~40℃ |
process flow |
1) Degreasing-Suggested the first two degreasing,if only one degreasing,can improve degreasing agent concentration or temperature or prolong degreasing time,to fully processed surface without grease,phosphate-free degreasing agent recommended products. (we have no phosphorus efficient degreasing agent) 2) Tap water washing-to washing thoroughly. 3) Deionized water washing-electrical conductivity <200μS/cm 4) composite silane vitrification agent 5) Deionized water washing-electrical conductivity <30μS/cm 6) Drying-70 ~ 150 ℃ air drying or blow drying |
Preparation of tank liquid |
This processing layer must be completely dry before painting.No need to dry before electrophoresis. The bath PH value should measured many times every day.PH measurement requires use of fluorine ion and stable PH meter (calibration between PH 4-6.86). |
test method |
Electrical conductivity The conductivity meter calibration is used after the determination of deionized water conductivity PH Value The PH meter calibration is used after the determination of the PH of the solution or use precise PH paper detection range of (3.8-5.4), it is recommended to use PH test paper test. |
Equipment requirements |
All access to the equipment all requirements of this treatment with stainless steel or lined for fluoride resistant hard PVC or PE, do not use cast iron tub! |
Attention |
Wear protective glasses, rubber gloves and wear protective clothing during processing. Avoid direct contact with eyes,skin,clothing and equipment. Get medical attention if accident happen. |
packing |
25kg/barrel |
Storage environment |
Storage temperature requirements between 5-45 ℃, if the product has a 10% deposit, please do not use. |
guarantee period |
One year |
wastewater treatment |
Tank liquid is acidic,and contain phosphate,sewage may be required to neutralize or waste water treatment. |
Contact Us
- Changzhou Junhe Technology Stock Co.,Ltd
- Contact nameMr. Lin
- Phone86-519-85922787
- Address20FL., Zhongchuang Budg., Times Commerce Plaza, 396 Tongjiamg Ave, Changzhou, Jiangsu, P. R. of Chin Changzhou,Jiangsu
- custom cnc machining mill turning fabrication sheet metal stamping services
- Aluminum Low Friction Rings China Manufacturer and Supplier
- Aluminum CNC Custom Machining Parts top manufacturer in China
- MAN 27/38,MAN 6L27/38,MAN 12V27/38,MAN 8L27/38,MAN 9L27/38 SPARE PARTS
- CNC processing rubber processing plastic processing
- 3D printing sheet metal processing CNC processing rubber processing plastic processing
- 3D printing sheet metal processing
- CNC processing rubber processing plastic processing
- 3D printing sheet metal processing CNC processing rubber processing plastic processing
- Sheet metal processing stamping processing
- CNC machining, machining, 3D printing, sheet metal, cabinet.
- CNC Machining Parts EDM Machining Non-standard Parts Wire EDM Factory Price CNC Machining Service China
- High precise Machining parts stainless steel laser cutting service
- Custom stainless steel sheet fabrication,metal case fabrication,custom metal case
- Laser cutting/ bending/welding custom sheet metal fabrication
- CNC sheet metal fabrication stainless steel fabrication aluminum fabrication
- Custom laser cutting service and Machining parts Engineering vehicle accessories
- China manufacturer Engineering vehicle connectors Engineering vehicle connecting shaft
Popular Searches
Find Similar Products By Category
- Mechanical Parts & Fabrication Services > Custom Fabrication Services > Machining Services
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Mr. Lin
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-