Bimetallic Thermostatic Radiator Steam Trap 0.01 - 1.6 MPa

Delivery Time:About 20 days
Certification:ISO9001 & API

Bimetallic Thermostatic Steam Trap 0.01 - 1.6 MPa   TB11

Quick Detail:

Model: TB11

Feature: bimetallic type                        
Structure:Thermostatic Steam Trap
Pressure:0.01 - 1.6 MPa        
End Connection: Screw, Flange, Socket Welded             
Application:  steam main pipe, steam tracer  etc...

Specifications:

Thermostatic Steam Trap
Tight Shut-off with SCCV System
Adjustable Discharging Temp.
Water Seal No Steam Loss
Installed In Any Direction

Bimetallic Steam Trap / Thermostatic Steam Trap

Model:

TB11

Features:

1. Tight shut-off and long service life by using SCCV system. 2. Efficient in energy saving---adjustable discharging temperature and effectively using the sensible heat of hot condensate. 3. Discharging temperature can be adjusted when the pipe net is in operation. Can be installed in any direction. 4. Hot condensate exists just before the trap, forming a tight water seal, which ensures no steam loss. 5. Withstands water hammer with outstanding performance of air venting. 6. Operating without noise, benefiting for environmental protection. 7. Full open at the beginning of steam supplying, discharging cold condensate and air rapidly, which ensures quick start-up. 8. Stainless steel internals are resistant to corrosion and cavitation. Small in size and light in weight, easy maintenance.

Application:
This steam trap is suitable for steam main pipe, steam tracer, radiator, low temperature heating trough, jacketed kettle and heating system etc...

Note:
This steam trap\'s Insulation is not recommended for pipe section 1 meter before the trap and the trap itself.