Contact Platform Support
Help CenterBlack Wireless 16-Channel Flash Trigger Low Consumption ERF16 Trigger
Related Products
-
FSK 7 Channel Multi Functional Wireless Remote Flash Trigger For CanonNegotiableMOQ: 1 Piece -
Ultra High Speed Wireless Flash Triggers / Remote Flash Triggers For Multiple CameraNegotiableMOQ: 1
-
3 Groups Canon Universal Wireless Flash Trigger With Transmitter + ReceiverNegotiableMOQ: 1 Piece
-
2.4G Pixel Sync Wireless Flash Trigger High Speed PCB Antenna Built-InNegotiableMOQ: 1 Piece
-
7\" Metal Nikon / Canon Camera Magic Arm Friction Articulating With LCD Monitor LEDNegotiableMOQ: 1 Piece
Black Wireless 16-Channel Flash Trigger Low Consumption ERF16 Trigger
Feature
1. 16-channels radio frequency;
2. 30m trigger working distance;
3. Sync speed high up to 1/250s;
4. Local test at receiver end;
5. Low consumption and long life-spam;
6. PC-in socket built-in;
7. Delicate design and perfect touch feeling;
Description:
ERF16 is specially designed for studio working photographers. With delicate design, the product utilizes global
standard radio frequency 433Hz, 16-channels, perfectly apply to studio photograph with multiple different
backgrounds, and efficiently avoid the possible interference disturbance. In addition, ERF16 is built-in new feature
like ‘Local test’ on receiver, comparing to the traditional studio flash trigger it’s much more convenient to
enhance your testing practice.
Transmitter:
| Transmitting electricity | 10ma |
| Transmitting time | 100ms |
| Battery Type | 23A |
| Battery Capacity | 60mah |
| Stand-by electricity | 5UA |
| Transmitting times | 216000 |
| Stand-by time | 12000 days |
Receiver:
| Stand-by electricity | 600~700ua |
| Working electricity | 2ma |
| Battery Type | AAA |
| Battery Capacity | 900mah |
| Stand-by time | 1285 days |
Compatibility:
All cameras, studio flash lights
1. Limited Operating distance
Check if the battery is exhausted.
Try to move transmitter\'s location.
2. Camera shoots but doesn\'t focus
Make sure the camera body and lens focus mode is set to AF, not MF.
3. General Troubleshooting Checklist
Make sure the battery is installed and receiver power switch turned on.
Set the transmitter and receiver to the same channel.
Make sure the transmitter and receiver are set to the correct function mode.
Make sure the hot shoe mount is correctly connected.
4. Misfires or Signal Interference
Please change the channel of the transmitter and receiver at the same time.
Send Inquiry to This Supplier
You May Also Like
-
3000W Travel Adapter With 110V-220V Step Up/Down Voltage ConversionUS$ 18 - 40MOQ: 100 Units
-
Electronic CapacitorNegotiableMOQ: 2000 Pieces
-
6\"/8\" FramesNegotiableMOQ: 500 Pieces
-
Turing F1280 High-Resolution IR Module: Precise Thermal Perception for Continuous OperationNegotiableMOQ: 50 Pieces
-
Oven Capacitor CH85 2100VAC Capacitor for MicrowaveNegotiableMOQ: 1
-
20kA Surge Protective Device SPD (SP-D10)US$ 0.01 - 0.02MOQ: 1 Piece
-
IRFP450,100% New and Original. Top Sales!!!NegotiableMOQ: 100 Pieces
-
Miniature Capacitor 2.7v1f 6.3x9mm Super CapacitorUS$ 0.35 - 0.5MOQ: 100 Pieces
-
50V 10UF CapacitorUS$ 0.5 - 1MOQ: 200 Pieces
-
BNCHG Terminal Block Pin Connector for Over 12 Year ExperienceUS$ 0.35 - 0.4MOQ: 10000 Sets
