Home > Products > Electric Magnetic Lock > 12v 24v Double door 600lb Signal monitored Electric Magnetic Lock , electromagnetic lock EM lock
12v 24v Double door 600lb Signal monitored Electric Magnetic Lock , electromagnetic lock EM lock
- 0 Meter / Meters per Month
- T/T L/C D/P D/A
- 7 days
- High Quality Cars Oil Seal NBR FKM Wear Resistant Skeleton Oil Seal
- SEAL KIT NXQ-AB-25/31.5-L-E for power plant
- mechanical seal HSNH280-43 power plant spare parts
- Factory Direct Sales TG TG4 Oil Seal FKM NBR Rubber Skeleton Oil Seal
- Mechanical seal HSNS210-40A for power station
- Different Size Color O-Ring NBR EPDM FKM FPM Rubber O Ring Seal
Product Details
Brand Name: | Vians | Place of Origin: | China | Model Number: | VI-280BS |
Product Description
Certification:CE/ROHS/FCC/MA
12v 24v Double door 600lb Signal monitored Electric Magnetic Lock , electromagnetic lock EM lock
Product Overview
The design of magnetic locks(Electromagnetic lock) is the same as the electromagnet. By using the principle of electromagnetic, when current passes through the silicon steel sheet, magnetic locks will produce powerful suction, thereby helps to tightly absorb iron plate. Even small current will produce huge magnetic, which can effectively control the door.
Vians magnetic locks adopt international leading production equipment and packaging technology, which not only makes our locks' antioxidant capacity of the surface reach the international leading level, but also helps to increase the holding force (higher 20% than other manufacturers). Now our locks have been sold to more than 60 countries and regions around the world, they are widely used in the important places such as airports, subways, banks, prisons, intelligent buildings, intelligent community and so on, and become convenient, fast and intelligent tool for global users, gain good reputation from the customers.
Specification
Product Parameter | Parameter Description |
Size | 500L*47W*26H(mm) |
Armature Plate Dimension | 180Lx38Wx11H(mm) |
Holding Force | 280kg(600Lbs*2) |
Input Voltage | 12 or 24VDC |
Current | 12V/500mA or 24V/250mA |
Suitable | Wooden door , Glass door ,Metal door , Fireproof door |
Surface Temp | ≤+20℃ |
Operating Temp | -10~+55℃(14-131F) |
Humidity | 0~90%(non-condensing) |
Cover Finish | Anodized aluminum |
Lock Finish | Zinc |
Armature Plate Finish | Zinc |
Weight | 4.2KG |
Product detail
Feature
◆ Collinear Load Test 280KG(600Lbs*2).
◆ Dual Voltage 12 or 24 VDC(optional).
◆ Built-in reverse current protection device (MOV).
◆ Anti residual magnetism design, anti-wear manufacturing materials.
◆ Shell is made of high-strength aluminum alloy, Anodized.
◆ Increase the holding Force, Dual Insulative Hosing.
◆ MA certified products of China / CE certification of EU.
◆ Complete electromagnetic suction working no mechanical failure.
Installation drawing
Product mounting bracket
Wiring
Trouble and Shooting
Troubles | Cause | Shooting |
Door cannot lock |
1. Circuitry malfunction or low voltage. 2. The power supply wire is too thin and long to cause big decrease of voltage. 3. Power supply is broken to cause no voltage output. 4. The positive and negative wire of power supply is connected in reverse. 5. The electromagnetic lock no power input. |
1. Check the connection, and measure the voltage to see if it is normal. 2. Modify or change the power supply wire into thicker one. 3. Check the power polarity and correct the connection. 4. Check to see if power supply or controller is correctly connected to NC.Make sure to see up the controller correctly. |
No transform of indicator output with low holding force. |
1. The mount plate and the electromagnetic lock face not in complete close. 2. The mount plate is fixed to tight, no room to move. 3. The electromagnetic lock and the mounting plate not at same level for case the door is deformed or moved. 4. The surface of mount plate or electromagnetic lock is not clear. 5. The power supply with lower power. 6. The power supply wire is too thin and long. 7. The electromagnetic lock is malfunction. |
1. Check the face of mount plate or electromagnetic lock, if the face of plate is deformed to cause no complete close to the lock, please change the plate. 2. Check if the rubber gasket is put into the stick of plate, and adjusts the bolt of plates not too tight at least a little movable. 3. Adjust the mount plate and electromagnetic lock to be level at each other and close completely. 4. Clean the surface of lock and plate, if rusted to cause no working please change the part. Contact Us
Product Categories
New Products
Popular Searches
We will find the most reliable suppliers for you according to your description. Send Now
Your message has exceeded the limit.
Contact supplier for lowest price
Your message has exceeded the limit.
|