Uniform Circumference Rotary Screen Printing 155M High Utilization Ratio Ni

Uniform Circumference Rotary Screen Printing 155M High Utilization Ratio Ni​

In flatbed printing, screens are usually made from polyester mesh that has been stretched onto a frame. In order to achieve good printed edge definition and detail, press operators leave a small gap between the stencil and the substrate. During the printing cycle, the squeegee closes this gap, bringing the screen and substrate into contact by depressing the screen. The tension of the fabric causes it to "snap off" the substrate immediately behind the moving squeegee, allowing the transferred ink to retain the detail of the stencil. Without off-contact, the screen would tend to stick to the printed substrate and the image would be smeared or blurred.

Material handling Because rotary presses work with web-fed materials, they eliminate the need to feed substrates into the press piece by piece, as is common with flatbed units. Users simply thread the desired material into a rotary machine from a reel at one end, and the machine continues to pull more material through as needed.

In contrast, rotary screen printing bypasses the whole off-contact/image-distortion issue. This is because on rotary presses, the surface of the cylindrical screen just makes contact with the web as it moves between the screen and the impression roller. Maintaining this line of contact is often referred to by rotary-press users as "kiss printing." The off-contact in rotary printing is essentially zero because creating snap-off is unnecessary--the rotation of the screen away from the print surface serves the same basic function.

Rotascreen Trendline G

The most versatile printing machine on the market. Any repeat size from 64 to 102 cm (≈ 25 - 40 in) can be printed without adaptors. Width adjustment of both printheads enables narrow printing on any wider machine.

One or both sided screen drive. High precision printing at any speed up to 120 m/min (394 ft/min). Automatic pre-repeat adjustment and design memory. Original Zimmer Magnet System Plus for the color application. Maximum flexibility, maximum rentability, and maximum quality are combined in the new Rotascreen modular machine concept. Various squeegee systems can be combined, with individual selection of infeed and exit systems.

Standard rotary screen for textile printing:

DLH=Small open area,suitable for transferprint

rotary screen printing

silk screen printing fabric printing T shirt printing digital printing

high tension polyester silk screen printing mesh

T- shirt screen printing monofilament polyester bolting cloth

Monofilament polyester bolting cloth (printing mesh) Silk screen printing mesh

Competitive Advantage:

· higher speed of printing

· can reduce cost

· higher utilization ratio

· highest quality

· high open area,

· good toughness & elasticity,

· can be used for 5~7 times repeatedly,

· saving dyestuff,

· bear high temperature

Package:plywood cases or as you required

Package diagram:

Product use effect: