Sell 120mhz Programmable Universal Counter

Model No.:
Product Origin:
Brand Name:
Price Terms:
Payment Terms:
Certification:
Description:Programmable Record (MAX / MIN): Records and displays the MAX and MIN values of the input freq. Programmable Relative (REF / ERR): Displays Reference frequency and the deviation of the measured frequency from the reference frequency as a % error. Programmable Compare (GO-NOGO): The LCD will display PASS if the input frequency is with in the HI/LO limits, LO if the frequency is lower than the LO limit and HI if the frequency is higher than the HI limit. Frequency range: CHA, B: 120MHz Measurement: FRQ. A, FRQ. B, Time interval, Totalize, Ratio A/B, Difference Freq. (A-B), Duty cycle and RPM Resolution: 7 Digits Range: Full Auto Range Trend Plot: The REF is the centerline value on the trend graph, H/Div is the X axis (time) and V/DIV is the Y axis (amplitude). Setup: Setting and functions may be selected and stored in memory from the front panel. Eight setups may be stored in memory. Equipment: Displays information about your instrument including the Model number, serial number, Calibration date, GP-IB address and Firmware revision. Remote Control: Function and ranges may be controlled from a PC via the RS232 or the optional GP-IB interface. Display: 128 by 64 pixel Super Twisted LCD display Power Source: May be used with any line voltages from 85V to 270Vac (+-10%, 48 to 66Hz) without any internal changes. The C3110 is a high performance and low cost programmable universal counter to 120MHz. It is designed by a high-tech team. This instrument combines the bench-top and system features which provides a versatile solution for your testing requirements now and in the future. Specification CHANNEL A CHANNEL B Frequency Range DC Coupled: 0 ~ 120MHz AC Coupled: 10Hz ~ 120MHz Sensitivity 25mVrms (Sine Wave) Coupling DC or AC Impedance 1Mohm less then 35pF Attenuator x1, x10 Maximum Input voltage 250V (DC or AC Peak) Trigger slope Positive or negative Resolution 0.00001Hz (at Gate time=1Sec, Input Frq=200Hz) Channel CH A, CH B Measurement Function FRQ.A, FRQ.B, A-B (Time Interval), TOT.A (Totalize), Ratio A/B, A-B, DUTY. A and RPM A Gate Time 50mS, 100mS, 200mS, 300Ms, 400mS, 500mS, 600mS, 700mS, 800mS, 900mS, 1S, 2S, 3S, 4S, 5S, 6S, 7S, 8S, 9S, 10S