Y Type Shot Peening Machine , Auto Blasting Machine For Foundry Indsutry

Delivery Time:45 Days
Certification:Qualified

" Y " Type Hanger Type Shot Blasting Equipment for Foundry Indsutry

Hanger Type Shot Blaster Machine Description

Hanger Spinner shot blaster machines are the solution for batch blasting of small to medium size parts which are suitable for hanging upon a multi arm jig suspended by hook arrangement in the roof of the machine. The machine is typically supplied with an external beam arrangement allowing the operator to load / unload safely. An alternative “Y” track arrangement will also allow the operator to load a second jig whilst the first jig is going through the blasting cycle ensuring loading times are minimised.

During the blast cycle the jig is rotated through 360º and oscillated to ensure that all faces are cleaned. Timed door interlocks prevent the operator opening doors either during the blast process or for a short period of time after the completion of the blast cycle to ensure operator safety.

Structure of Hanger Type Shot Blaster Machine

Items	The main parts
Blasting Chamber	Chamber cover, liners, end plate, manual door, etc
Blasting Wheel	Blasting Wheel, Motor, Pulley, Triangle Belt, Base Plate, Etc
Elevator System	Cover, Elevator Belt Assembly, Pulley, Drive, Tight Device, Etc
Separator System	Separator, Shot Bucket, Etc
Screw conveyor	Screw shaft, blades, bearing base, etc
Hanger Hook System	double track, crane etc
Pneumatic System For Shot	Shot gate, cylinder, shot- slip pipe, air processor, etc
Electronic Control System	Control cabinet (conventional electronic control), the second line, etc
Dust Collector System	Bag type dust collector , sedimentation tank, piping, blower, etc

Hanger Type Shot Blaster Machine Advantage

Hanger spinner blasting machines are the preferred choice for workpieces that are not suitable for tumbling but allow themselves to be hung from a inverted "christmas tree" type jig ( for multiple workpieces) or a hook (for single larger workpieces).The machine is supplied with a work beam to allow the operator to load at a comfortable safe height and then present the workpieces to the drag mechanism for auto entry into the blast chamber.
Once inside the chamber the jig / workplace is rotated before the blast wheel(s) giving complete coverage. The blast cycle is controlled by an adjustable timer and a timed dir delay prevents the operator from opening the door until the blast cycle is completely finished and it is safe to do so.

Function & Application field
1. Surface cleaning and strengthening for small medium castings, hardware, heat-treated workpieces which can be hanged easily.
2. Performing high efficiently for batch quantity processing.
3. Exampled workpieces such as automobile tractor motor body case, engines cylinder boby, cylinder cover, gears, motorcycle engine body cases, coupler yoke components, bogie components, hardware body case, water pump, etc.

Working principle
1. The workpieces can be moved continuously under the hanger chain, and stops when loading & unloading, and being cleaned at blasting area.
2. The workpieces can be loaded & unloaded, and shot blasted at fixed place by setting.

Notice and Maintenence

1. Regularly cleaning the collect box of the dust collector to protect the dust removing pipe from blacking.

2. Cleaning the bottom of the blasting room and the separator frequently.

3. Often cleaning the shots around to avoid slipping and falling.

4. Regularly check the rubber belt and belt of the elevator to avoid deviating.

5. Never to open the workpiece feeding door unless the machine stop completely to avoid accident.

6. Frequently check the end plate of the blasting chamber and the wearable parts of the blasting wheel. To change the badly worn parts in time.

7. The machine must be lubricated periodical to guarantee flexible rotating.

8. regularly check and clean the drive section of the machine, change the badly worn parts.

Buying Leads:
If you are interested in our machine,please kindly inform us the following items:

1. The name of your workpiece?( such as: iron casting parts, Aluminium auto parts etc.)
2. The purpose of the blasting?(rust removal or others?)
3. The size range of the workpiece?( max size and min size)
4. The weight of the workpiece? (max weight and min.weight)
5. The cleaning capacity per day/month?
6. Any other technical requirement?