Home > Products > Automatic Barrier Gate > High Speed Automatic Barrier Gate Electronic Boom Barrier For Intelligent Parking System
High Speed Automatic Barrier Gate Electronic Boom Barrier For Intelligent Parking System
- 0 Piece / Pieces per Month
- T/T L/C D/P D/A
- 7 days
-
Supply of Sodimax financial escort vehicle in-vehicle wireless 4G monitoring solution
-
Supply school student delivery vehicle 4G wireless video real-time surveillance video recorder
-
4-channel 1080P single SD truck-mounted video recorder supports 4G network GPS full real-time monitoring
-
SD Card 1080P HD Car Video Recorder H.264 Car Video Surveillance Solution
-
1080P HD MDVR Wifi GPS 3G Digital Video Recorder for School Bus CCTV System
-
SD Card 720P HD Vehicle DVR H.264 Car Alarm Monitoring Solution
Product Details
| Brand Name: | WONSUN | Place of Origin: | China | Model Number: | DZTP-133-A |
Product Description
Certification:CE, ISO, SGS
High Speed Automatic Barrier Gate Electronic Boom Barrier For Intelligent Parking System
Model Selection and Differences
Specifications
|
Model |
WST1211 |
|
Working Temperature |
-40℃～+75℃ |
|
Voltage |
220V±10%, 110V±10%, 50/60HZ |
|
Rated power |
80W |
|
Relative humidity |
≤90% |
|
Remote control distance |
≥30m |
|
Net weight |
48kgs |
|
Speed |
1S,1.8S,3S, 6S |
|
Max boom length |
6 meters |
|
Motor Rotational speed |
1400rmp |
|
Protection Degree |
IP44 |
Communication with customers
1) Q: Connected power and press open/close button but traffic barrier gate no action?
|
A |
Reason |
Solution |
|
1 |
Fuse blown |
Check fuse and power in controller |
|
2 |
Battery of remote control powered off |
Change a new one |
|
3 |
External protection circuit break or at protecting status |
Open the barrier door and click OPEN/CLOSE button on control box |
|
4 |
Same frequency interference |
Check photocell and loop detector |
2) Q:Connected power and press open/close button,traffic barrier gate will move but even when it is at right position, the motor still running and not stop?
|
A |
Reason |
Solution |
|
1 |
Limit switch |
Adjust the horizontal/vertical limit switch to correct position |
|
2 |
Main controller failure |
Change a new one |
3) Q: Motor running but traffic barrier gate arm no action?
|
A |
Reason |
Solution |
|
1 |
Barrier arm at 45° position where is hard to move |
Unlock clutch and manually rotate arm to horizontal or vertical position then try again |
|
2 |
Tension of balancing spring not suitable |
Adjust spring exactly |
|
3 |
Low working voltage |
Check the voltage and power |
4) Q: When opening/closing,traffic barrier gate arm cannot reach right position (90° vertical & 180° horizontal)?
|
A. |
Reason |
Solution |
|
1 |
Length adjustment of connecting rod not correct |
Open barrier door and unlock clutch to check when arm at 90° vertical position if the master rod covers slave one; when arm at 180° horizontal position if master rod and slave one are in the same straight line |
|
2 |
Nuts on the limit switch loose |
Tighten the nuts when arm at 90° vertical and 180° horizontal |
