Contact Platform Support
Help CenterThomas Temperature Shocks Resistant Sealant
Related Products
-
Thomas Chips Potting AdhesiveNegotiableMOQ: 10 Kilograms -
Moisture and Temperature Resistant AdhesiveNegotiableMOQ: 10 Kilograms
-
Thomas High Strength Structural Adhesive Bonding Carbide Cutting ToolsNegotiableMOQ: 10 Kilograms
-
Thomas High Temperature Resistant Adhesive Used in HEPANegotiableMOQ: 10 Kilograms
-
Thomas High Temperature Resistant Magnetic Motor AdhesiveNegotiableMOQ: 10 Pieces
Name |
Thomas thermal shocks resistant adhesive (THO4065-1) |
Outline |
It is two-component modified epoxy adhesive. They produce extremely durable, highly elastic bonds that perform well in temperature extremes. |
Applications |
Bonds are firmly formed on a variety of substances such as PVC, ABS, silastic or polystyrene plastics. Durable bonds can also be produced when duroplasts bonding to metals. |
Features |
Part A is sticky liquid with various colors, part B is in tinted paste shape. Curing time. At 25 °C, within 4 hours, its surface cures, it reaches its maximum bonding strength one and a half days later. If heated at the temperature of 80°C, it cures within 2 hours Being weather and heat-resistant, it adapts to a wide range of temperature and bonds well under high temperature. Mix the two components in a certain proportion, apply it to the surface of the substrates acquiring no strict surface treatment, which makes it so convenient to use. Being stable, its storage time is one and half a year. The main technical parameters are as follows: Heat resistance scope：- 70°C－+ 235°C hardness: D80 tensile strength≥29kn/m; peeling strength:50KN/M Shearing strength≥25 Mpa thermal expansion coefficient:59 water absorption:24h 55℃ 98% 0.1% |
Instruction |
1. Clean the surface of the material, make sure they have no dust or oil on them, wait until they are dry. 2. Mix A and B in a proportion of 3:1 to get perfect bonding result and apply it evenly on the substrates. 3. Spread the mixture on the substrates, put them together and apply some strength on it. |
Notes |
1. Use another can or container to blend A with B. The tools used to get A and B should be different. 2. A and B should be mixed well. 3. It is necessary to keep it well ventilated and away from fire. 4. If it has contact with skin, you should wash thoroughly with soap and water. 5. It can be stored at well-ventilated places with low temperature, and keep them away from fire. 6. Cover the lip after using it. |
Copyright © 2005-2019Thomas Technology, Inc. All Rights Reserved.
Send Inquiry to This Supplier
You May Also Like
-
Thomas High Temperature Resistant Adhesive for FiltersNegotiableMOQ: 1 Set
-
Thomas Magnet AdhesiveNegotiableMOQ: 1 Kilogram
-
Thomas Electronic Component Potting SealantNegotiableMOQ: 1 Piece
-
Thomas Filters Sealant Used in HEPANegotiableMOQ: 100 Kilograms
-
Thomas UV Curing High Temp. Resistant AdhesiveNegotiableMOQ: 1 Kilogram
-
Thomas Fire Retardant UV AdhesiveNegotiableMOQ: 10 Kilograms
-
Thomas Thermal Shocks Resistant Voice Coil Wire AdhesiveNegotiableMOQ: 10 Kilograms
-
Thomas Moisture and Temp. Resistant AdhesiveNegotiableMOQ: 1 Kilogram
-
Thomas Sensors Encapsulating AdhesiveNegotiableMOQ: 10 Kilograms
-
Ceramics High Temperature Resistant AdhesiveNegotiableMOQ: 10 Kilograms
