Contact Platform Support
Help CenterSeparate Surface Roughness Tester SRT-6210S
Related Products
Applications：
Widely used in production site to measure surface roughness of various machinery-processed parts,calculate correspondingparameters according to selected measuring conditions and clearly display all measurement parameters.
* Be compatible with four standards of ISO, DIN, ANSI and JIS. When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism inside the tester. The sensor gets the surface roughness by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier. The exclusive DSP processes and calculates and then outputs the measurement results on LCD.
* Multiple parameter measurement: Ra, Rz, Rq, Rt.
* Highly sophisticated inductance sensor.
* Four wave filtering methods : RC, PC-RC, GAUSS and D-P.
* Small in size, light in weight and easy to use.
*Manual or automatic shut down.
* Can memorize 7 groups of measurement results and measuring conditions for later use or download to PC.
* Metric /Imperial Conversion.
* Use “USB data output” and “RS-232 data output” to connect with PC.
* Provide “Bluetooth ? data output” choice.
Display 4 digits, 10 mm LCD, with blue backlight
Parameters Ra、Rz、Rq、Rt
Measuring Range
Ra，Rq：0.005~16.00 um / 0.020~629.9 uinch
Rz，Rt：0.020~160.0 um / 0.078~6299 uinch
Accuracy ≤ ± 10%
Fluctuation of display value Not more than 6%
Sensor Test Principle Inductance type
Radius of Probe Pin 5 um
Material of Probe Pin Diamond
Dynamo-measurement of Probe 4 mN（0.4 gf）
Probe Angle 90°
Vertical Radius of Guiding Head 48 mm
Maximum driving stroke 17.5 mm / 0.7 inch
Cutoff length (l) 0.25 mm / 0.8 mm / 2.5 mm optional
Driving speed Sampling When Length = 0.25 mm, Vt = 0.135 mm/s
When Length = 0.8 mm, Vt = 0.5 mm/s
When Length = 2.5 mm, Vt = 1 mm/s
Returning Vt = 1 mm/s
Resolution 0.001 um, if reading ＜ 10um
0.01 um, if 10um ≤ reading ≤ 100um
0.1 um, if reading ≥ 100um
Evaluation length 1~5 L optional
Auto Power Off
Operating conditions Temperature: 0~50 ℃ Humidity: ＜ 80 %RH
Power Supply 4 x 1.5v AAA size (UM-4) battery
Dimensions Main Unit 149 x 67 x 29 mm
Measuring Base 185 x 56 x 47 mm
Weight 485 g
Standard Accessories:
1. Main Unit
2. Small Screwdriver
3. Measuing Base
4. Adjustable Stand
5. Standard Sample Plate
6. Standard Sensor
7. Sheath of Sensor
8. Carrying Case
9. Instruction Manual
Optional Accessories:
1. Groove Stylus SRP-110
2. Curvature Probe SRP-120
3. Extension Rod SER-150
4. Measurement Stand SRS-1
5. USB, RS-232C data cable with software
6. Bluetooth data out put with software
Send Inquiry to This Supplier
You May Also Like
-
Endress+Hauser E+H Compact Conductivity Device Smartec CLD18-BGGENegotiableMOQ: 1 Piece -
Servo Motor Control Material Lab Testing Machine With ExtensometerUS$ 4500 - 10000MOQ: 1 Set
-
OMP60 Renishaw Probe A-4038-0001-21 A-4038-0002 Original and NewNegotiableMOQ: 1 Piece
-
30kn Computerized Servo Motor Control Universal Tensile Testing MachineUS$ 4500 - 10000MOQ: 1 Set
-
Computer Controlled Electronic Fabric Tensile Strength TesterUS$ 4500 - 10000MOQ: 1 Set
-
Computerized Electronic Universal Ceramic Materials 3 Point Bending Testing Laboratory Equipment 30knUS$ 4500 - 10000MOQ: 1 Set
-
Servo Motor Control Compression Universal Testing Machine 30knUS$ 4500 - 10000MOQ: 1 Set
-
Professional Computer Controlled Material Lab Universal Testing Machine 50kn Computer Controlled Electronic Fabric Tensile Strength TesterUS$ 4500 - 10000MOQ: 1 Set
-
Electromechanical Computer Controlled Material Lab Testing Machine Servo Motor Control Auto Compression Testing MachineUS$ 4500 - 10000MOQ: 1 Set
-
Computer Controlled Compression Testing Machine With ExtensometerUS$ 4500 - 10000MOQ: 1 Set
