Separate Surface Roughness Tester SRT-6200S

Applications：
Widely used in production site to measure surface roughness of various machinery-processed parts, calculate correspondingparameters according to selected measuring conditions and clearly display all measurement parameters.
 * Be compatible with four standards of ISO, DIN, ANSI and JIS. When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism inside the tester. The sensor gets the surface roughness by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier. The exclusive DSP processes and calculates and then outputs the measurement results on LCD.
* Multiple parameter measurement: Ra, Rz, Rq, Rt.
* Highly sophisticated inductance sensor.
* Four wave filtering methods : RC, PC-RC, GAUSS and D-P.
* Small in size, light in weight and easy to use.
*Manual or automatic shut down.
* Can memorize 7 groups of measurement results and measuring conditions for later use or download to PC.
* Metric /Imperial Conversion.
* Use “USB data output” and “RS-232 data output” to connect with PC.
* Provide “Bluetooth ? data output” choice.
Display   4 digits, 10 mm LCD, with blue backlight
  Parameters   Ra、Rz、Rq、Rt
  Measuring Range
 
  Ra , Rq : 0.05~10.00 um / 1.000~400.0 uinch
  Rz , Rt : 0.020~100.0 um / 0.780~4000 uinch
 Accuracy :  ≤ ± 10%
  Fluctuation of display value :  Not more than 6%
  Sensor   Test Principle :  Inductance type
  Radius of Probe Pin :  10 um
  Material of Probe Pin  : Diamond
  Dynamo-measurement of Probe  : 16 mN（1.6 gf）
  Probe Angle   :90°
  Vertical Radius of Guiding Head   :48 mm
  Maximum driving stroke  : 17.5 mm / 0.7 inch
  Cutoff length (l)  : 0.25 mm / 0.8 mm / 2.5 mm optional
  Driving speed 
 Sampling 
 When Length = 0.25 mm, Vt = 0.135 mm/s
  When Length = 0.8 mm, Vt = 0.5 mm/s
  When Length = 2.5 mm, Vt = 1 mm/s
  Returning  : Vt = 1 mm/s
  Resolution  : 0.001 um, if reading ＜ 10um
                   0.01 um, if 10um ≤ reading ≤ 100um
                   0.1 um, if reading ≥ 100um
  Evaluation length :  1~5 L optional
  Auto Power Off
  Operating conditions  : Temperature: 0~50 ℃     Humidity: ＜ 80 %RH
  Power Supply  : 4 x 1.5v AAA size (UM-4) battery
  Dimensions  : Main Unit   149 x 67 x 29 mm
  Measuring Base :  185 x 56 x 47 mm
  Weight :  485 g