DC 3V Remove Mites Face Skin Beauty Machine Enhances Immune System

Delivery Time:3-5 days
Certification:CE,FCC,MSDS

DC 3V Remove Mites Face Skin Beauty Machine Enhances Immune System

Why to choose our products:

Benefits	Rejuvenates  Skin
Eliminates bacteria, viruses , fungi, yeast and protozoa
Reduces freckles and dark spots
Promotes wound healing, prevents infections and soothes burns
Supports skin detoxification
Enhances immune system
Product name	Skin rejuvenator(cleanser)
Model	OZ200
Size	89*89*222mm
Specifications	pure ozone generated between skin and glass surface on contact
Ozone and electrostatic charges cleanse skin
Remove mites and bacteria
Ozone output within international safety limits
Battery operated (2*AA) alkaline for about 8 hours

The product:

The OZ200’s design is streamlined and light weight, making it suitable for the user to hold for long periods of time without arm fatigue. 
Before using the unit, thoroughly clean the skin with water. The glass surface of the unit generates a thin layer of pure ozone when it comes in contact with skin. Gently rub the glass surface on the skin area where the ozone is required. 
Ozone will remove bacteria, germs and micro-organisms by oxidation. It will also bleach dark spots, reduce freckles, and is highly beneficial for the regeneration of healthy skin cells. It promotes skin healing, and soothes skin itchiness. It can also remove arm pit odors, but make sure that the skin area is dry before applying the OZ200.

The package:

There are four items in the box:

The OZ200 unit Holding base  Two AA alkaline batteries The instruction manual

Warning:

Due to the fact that high voltage static electrical charge can build up on the body of the user, mild electric shocks can occur in certain environments on rare occasions. however, this discharge should not cause bodily harm, beause the electrical energy is very small.

It is strongly recommended the user not use the oz200 for more than 30 minutes each time. 

After replacing the batteries, make sure that the silicon base cover is put back in place in order to avoid possible electric shocks during use.

Before use, please wash skin with warm water and make sure the skin area is free from any cream or make up. as ozone is capable of oxidizing anything in its way, contact with unknown materials or substances may result in unknown effcts on the skin. 

Absoutely do not connect this product to other outside power sources.  there is high voltage inside, even on the battery shell.

Installation:

Remove the silicon end cap, unclip the battery cover, and insert the two alkaline batteries supplied. Please note that the terminal with a spring is the negative terminal of the battery. Make sure that the cover is fitted properly, for it is also a safety switch to prevent high voltage electricity from leaking out. No current will flow if the cover is not fitted properly.

Operation:

Specifications:

3V D.C alkaline batteries only  150-250mA Variable ozone strength control Ozone output: less than 0.05ppm/8 hours Dimensions:  89×89×222 mm (3 1/2”×31/2”×8 3/4”)

Notes:

It is recommended not to keep the device on any particular spot for more than 10 minutes, and not to use the device for more than 30 minutes at a time. Alkaline AA batteries must be used because the unit requires even discharge characteristics. Do not try to dismantle the unit for repair. There are no serviceable parts inside. Only use a dry cloth to clean the glass surface and the unit. Avoid contact with water at all times. As the glass surface itself is constantly coated with ozone, when used by another person, there is no need to disinfect OZ200, as ozone is a powerful antiseptic itself.

Disclaimer: 

All contents mentioned about ozone’s properties are based on common scientific and medical know