Shanghai Kangsheng Superalloy Co., Ltd.: Tongchuan, Shaanxi, China

Home > Products > Incoloy 800H > Seamless Pipe ASTM B407 Incoloy 800H / UNS N08810 / 1.4958 Nickel Alloy Products

Seamless Pipe ASTM B407 Incoloy 800H / UNS N08810 / 1.4958 Nickel Alloy Products

FOB Price

US$ 4 - 5 / Square Meter

1 Square Meter(Min. Order)

Payment TermsT/T L/C D/P D/A
Delivery Detail7 days

Request Sample Customized Request Request Free Catalogs

Contact Now

Get lowest price

Product Details

Brand Name	NFCase		Place of Origin	China
Model Number	AIA-1

Product Description

Delivery Time:3-5 days
Certification:CE,FCC,MSDS

Incoloy 800H / UNS N08810 / 1.4958 Nickel Alloy Seamless Pipe ASTM B407

1. Grade: Incoloy 800H

2. Process: VIR - VAR - ESR - Forging - Cold Rolling / Cold Drawing - Semifinished - Finished

3. Delivery Condition: Solution Annealed

4. Surface Condition: AP, BA, Polished

5. OD: 6-325mm

6. WT: 0.5-25mm

7. Length: Max. 25 meters

8. Specification: ASTM, ASME, GB, JIS, GOST, DIN, etc.

9. Packing: Plywood case, Bundle

Incoloy 800H can be used at temperatures up to about 1100°C (2010°F). In order to have the best ductility this grade should be used above 700°C (1290°F). Because of its high nickel content and prescribed maximization of (Ti + Al) content, Sanicro 31HT shows extremely little tendency to precipitation of embrittling phases.

UNS N08810 is characterized by:

-High creep strength
-Very good resistance to oxidation
-Good resistance to combustion gases
-Very good resistance to carburization
-Good resistance to nitrogen absorption
-Good structural stability at high temperatures
-Good weldability

UNS N08800/N08810/N08811 Chemical Composition%
Alloy Designation	Element	C	Ni	Cr	Mn	Fe	Si	Cu	Al	Ti	S
Incoloy 800	Min. %	-	30	19	-	39.5	-	-	0.15	0.15	-
Max. %	0.1	35	23	1.5	-	1	0.75	0.6	0.6	0.015
Incoloy800H	Min. %	0.05	30	19	-	39.5	-	-	0.15	0.15	-
Max. %	0.1	35	23	1.5	-	1	0.75	0.6	0.6	0.015
Incoloy800HT	Min. %	0.06	30	19	-	39.5	-	-	0.15	0.15	-
Max. %	0.1	35	23	1.5	-	1	0.75	0.6	0.6	0.015

Mechanical Propeties	Incoloy 800	Incoloy 800H	incoloy 800HT
Density:	7.9g/cm3	7.9g/cm3	7.9g/cm3
Melting Point:	1350-1400°c	1350-1400°c	1350-1400°c
Tensile Strength Min.(Mpa):	520	450	450
Yield Strength Min. (MPa): 0.2% offset	205	170	170
Elongation A 5%(min.):	30	30	30
Rockwell Hardness Max.:	B95	B95	B95

Nominal Dia: 1/2 \"to 10\" NB for seamless pipe

Schedules: 5S, 10S, 40S, 80S, 10, 20, 30...120, 140, 160, XXS
All dimensions are in accordance with ANSI B36.19 and ANSI B36.10

Length:30 m(Max) or as your requirement

Process: Cold drawn, Cold rolled, Precision Rolled for Seamless Pipe or Tube

Finish: Annealed & pickled, bright annealing, polished

Ends: Beveled or plain end, square cut, burr free ,Plastic Cap at Both end

Packing: Bare packing, bundle packing with woven bag, wooden or steel frame crate packing, plastic cap protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.

Inspection and Test Procedure

1. 100% PMI,Spectro Chemical Aanlysis Test for Raw Material

2. 100% Dimension & Visual Examination

3. Mechanical Properties Test Include Tension Test,Flaring Test (For Seamless tube/pipe)/ Flange Test (For Welded Pipe & Tube), Hardness Test ,Reversed Flattening Test

4. 100% Hydrostatic Test or 100% NON-DESTRUCTIVE Test (ET or UT)

5. Radiographic Test for Welded Pipe (shall be accordance with specification,or shall be as agreed upon between the purchaser and vendor)

6. Straightness Test (optional)

7. Roughness Test (optional)

8. Intergranular Corrosion Test(optional)

Contact Us

Shanghai Kangsheng Superalloy Co., Ltd.: Contact nameMr. Jack Cao
Chat Now; Phone86-021-69922027; Address, Tongchuan, Shaanxi, China

*Email
Please enter Your valid email address.
*To

Mr. Jack Cao
*Message
Your inquiry content must be between 20 to 5000 characters.
Please enter a correct verification code.

Product Categories

Hastelloy C276	Incoloy 800	Incoloy 800H	Incoloy 800HT
Incoloy 825	Incoloy 925	Inconel 600	Inconel 601
Inconel 625	Inconel 718	Inconel X-750	Monel 400
Monel K500	Nickel 200

Seamless Pipe ASTM B407 Incoloy 800H / UNS N08810 / 1.4958 Nickel Alloy Products

You May Like

Product Details

Product Description

Contact Us

Product Categories

New Products

Popular Searches

Recommended Products

Find Similar Products By Category