O2S Oxygen Sensor - Probe Style O2S-FR-T2
O2S Oxygen Sensor - Probe Style O2S-FR-T2
FEATURES
* Oxygen pressure range 2 mbar - 3bar
* Zirconium dioxide (ZrO 2 ) sensing elements
* Non-consumption technology
* Integral heating element
* No need for temperature stabilisation
* No reference gas required
* High accuracy
* Linear output signal
* Operates with external interface boards
* 80mm, 220mm and 400mm probes available
SPECIFICATIONS
Heater Supply*
Porous Lid Cap 4V DC ± 0.1V DC (1.7A)
Stand by 1.65V DC (0.7A)
Full Porous Cap 4.35V DC ± 0.1V DC (1.85A)
Stand by 2V DC (0.85A)
Pump resistance @ 700℃** < 6kΩ
Permissible gas temperature
Standard Temp. -100 to 250℃
High Temp. -100 to 400℃
Gas flow rate 0 to 10 m/s
Repetitive permissible acceleration 5 g
Incidental permissible acceleration 30 g
* It is important to measure the heater voltage as close to the sensor as possible due to voltage drops in the supply cable. Heater can also be operated with an equivalent a.c. or PWM signals.
** The constant current source used in the pump circuit should be designed to drive a load of up to 6kΩ
Send Inquiry to This Supplier
You May Also Like
-
TGS5342 Carbon Monoxide Sensor CO2 SensorUS$ 8 - 12MOQ: 1 Piece
-
TGS6810-D00 For The Detection of Methane and LP GasNegotiableMOQ: 1 Piece
-
TGS6812-D00 For The Detection of Hydrogen Methane and LP GasNegotiableMOQ: 1 Piece
-
TGS813 Combustible Gas SensorsNegotiableMOQ: 1 Piece
-
TGS816 Combustible Gas SensorNegotiableMOQ: 1 Piece
-
3SP_NO2_20 P 15X15 NO2 Sensor 20 Ppm P Package 110-501US$ 1 - 1MOQ: 1 Piece
-
3SP_O3_20 P 15X15 O3 Sensor 20ppm P Package 110-401US$ 10 - 30MOQ: 1 Piece
-
CDM4160 Pre-calibrated Carbon Dioxide Sensor ModuleNegotiableMOQ: 1 Piece
-
CDM4161A Pre-calibrated Carbon Dioxide (CO2) Sensor ModuleNegotiableMOQ: 1 Piece
-
NO2-B43F Nitrogen Dioxide Sensor 4-ElectrodeNegotiableMOQ: 1 Piece