EKCC015A 3600W Split Air Conditioning Units 220V 50Hz For Office Buildings

Delivery Time:10 working days after received your payment
Certification:ARI ,CE，ISO9001,ISO14001,OHSAS18001，CRAA,CQC

EKCC 010A - EKCC 015A low static pressure central duct type air conditioner
 
 
Specifications:

Model	Indoor unit	EKCC010A	EKCC015A
Outdoor unit	EKAA010AC	EKAA010ARC	EKAA015AC	EKAA015ARC
Nominal cooling capacity	W	2600	2600	3600	3600
Nominal heating capacity	W	--	2800	--	3800
Rated input power	Cooling	W	950	960	1270	1280
Heating	W	--	890	--	1110
Rated current	Cooling	A	4.5	4.5	6.0	6.0
Heating	A	--	4.2	--	5.2
EER	W/W	2.74	2.71	2.83	2.81
Energy Efficiency Rating		/	/	/	/
Indoor unit	Air flow	m3/h	450	580
External static pressure	Pa	15(0/30/50)
Indoor unit weight	kg	22	22
Noise (high/medium/low)	dB(A)	30/28/26	31/29/27
Length x width x height	mm	1024×467×210
Outdoor unit	Noise	dB(A)	52	52
Outdoor unit weight	kg	35	40
Length x width x height	mm	780×255×538
Power supply		220V~/50Hz
Connector size	Liquid pipe external diameter φmm (in.)	φmm(in.)	6.35(1/4)	6.35(1/4)
Gas pipe external diameter φmm (in.)	φmm(in.)	9.52(3/8)	12.7(1/2)
Water drainage pipe		R3/4
Shell of exposed hoisting unit		EKCC010E	EKCC015E
Shell dimensions (length x width x height)	mm	1223×557×272

 
Note:
■ The GB 19576-2004 EER standard is applied.
■ The nominal cooling capacity is measured under the following conditions: The indoor dry/wet bulb reads 27/19 °C and the outdoor dry bulb
reads 35 °C.
■ The nominal heating capacity is measured under the following conditions: The indoor dry/wet bulb reads 20/15 °C and the outdoor dry/wet
bulb reads 7/6 °C.
■ The preceding performance data is based on the condition that the connection pipe between indoor and outdoor units is 5 m.
■ The air amount of the indoor unit is the air amount at high wind speed under standard static pressure.
■ The value in brackets for static pressure outside the unit is an optional value for static pressure. When an external hot water coil box is
used, the air resistance of the hot water coil box needs to be deducted from the original static pressure outside the unit to obtain the static
pressure value outside the unit.
■ The noise value for the indoor unit is measured under standard static pressure outside the unit in a semi-anechoic room without air return
plenum. The noise increases by about 5 dB(A) in the case of downward air return.
■ An indoor unit with an external electric heater box or external hot water coil box is equal to a standard unit.
■ For details about on-site power distribution and wiring for unit installation, see the nameplate or installation manual of the unit.
 
Description:
 
Indoor Unit

1, The unit features ultra-low operation sound. All parts such as fans and motors are carefully selected and continuously improved