125 Ton Punching Press Machine Steel Roll Forming Machinery Chain Transmission

Delivery Time:60 days after deposit
Certification:CE, SGS, ISO

125 Ton Punching Press Machine  Cabel Tray Roll Forming Machine Chain Transmission 

1. Equipment Structure and Technical Data

a. Decoiler 

Diameter: 508-610 expansion Expansion: passive capacity: 3 Tons manual  Max coil width: 1250mm

b. Levelling device

7 rolls levelling, 3 rolls up and 4 rolls down diameter 80mm, chrome and HRC60 heat treatment to secure the smooth surface leveling raw material thickness: 1-2mm Max leveling raw material width: 300mm power: 5Kw

C. Feeding device

Servo feeding motor: about 2.5Kw Yaskawa Servo feeding can control the punching distance in precision, controlled by PLC, and the feeding tolerance can be +-0.05mm,the servo motor can control the speed, and can accept the input signal, and react quickly, and performance well, the touch screen can display the rotating speed, the length and the quality, it can be controlled by the manual and auto modes.

d. Press Machine 

Series JH21-125 Brand name: Yangli Punching mould: as for the profiles, total need 6 sets of punching moulds, when need to punch the first hole drawing, change the punching mould 1, when punching the second hole drawing, change the punching mould 2, etc. When the punching heads break, they can be removed, and changed by the new punching heads. Punching moulds material: Cr12Mov, quench HRC58-62

e. Main Roll Forming

Material: galvanized steel and black steel sheet, thickness1.2mm forming speed: 10m/min  forming stations: about 20 stations  roller material: GCr15, quench HRC58-62, chrome plated shaft material: 45# steel, diameter 90mm drive system: 1.5 inches 20A Chain drive main power with reducer: 15Kw  cutting: hydraulic cutting, Cr12Mov, quench HRC58-62 hydraulic station: 7.5Kw PLC: Mitsubishi, Japan Touch screen: Panasonic, Japan  Encoder: Omron, Japan  Electrical parts: Schneider  Adjust the height by the motors and the rails, controlled by PLC

f. Cutting

Cutting blade material: Cr12Mov, HRC 58-62 Cutting after forming: cut the sheet after roll forming to required length Cutting motion: the main machine automatically stops and cutting wil take place. After the cutting, the main machine will automatically start.  blade material: Cr12, with heat treatment  length measuring: automatic length measuring tolerance of length: 6m 1.5mm number of cutting blades: 6 sets of cutting blades for different widths 

g. Out tables

length: 3 meters number: 2 units

h. Spare parts and tool box

	Name	Number
Tools	Feeler gauge	1
	Size spanner	1
	Inner hexagon spanner	1
	Clamp	1
	Standard spanner	1
	Shifting spanner	1
	Slotted screwdriver	1
Electric fitting(Schneider)	Active button	2
	Travel switch	2
	Transfer switch	2
	Emergency button	2
Hydraulic fittings	Fliter core of oil return	10
	O-shape ring	10
	Oil gun	1
	Magnetic Valve (Beijing Huade)	2
	Connecting screw	20
	Connecting screw cap flange	20
	Oil pipe	2
	Oil pipe connector	10
Other accessories	Chain	2 pieces
	Chain connector	5 pieces
	Bearing (Haerbin)	10 pieces

2. Working Flow

Un-coiler ------ Levelling-----Feeding-----Punching --- Roll forming ----- PLC control --- Hydraulic Cutting---- Run Out Table