Contact Platform Support
Help CenterFireproof Autoclaved Aerated Concrete Fly Ash Brick Manufacturing Machine
Related Products
-
Environmental AAC Block Plant , Autoclave Aerated Concrete AAC Block Production LineNegotiableMOQ: 1 Set -
Earthquake Resistant AAC Block Equipment Sand Lime Brick Plant 50000 m3NegotiableMOQ: 1 Set
-
Autoclaved Aerated Concrete Equipment Fully Automatic Fly Ash Brick PlantNegotiableMOQ: 1 Set
-
Light Weight AAC Block Manufacturing Plant , Fly Ash Brick Making PlantNegotiableMOQ: 1 Piece
-
High Efficiency Autoclaved Aerated Concrete Plant / AAC Blocks PlantNegotiableMOQ: 1 Set
Certification:ISO9001：2008
Lightweight Block Plant AAC Block Plant Autoclaved Aerated Concrete Plant
AAC block advantage:
1) Light Weight and high strength,
2) Fine insulation material and heat preservation,
3) Excellent sound insulation,
4) Fireproof and waterproof,
5) Last for long time,
6) Pollution free products,
7) Good frost resistance,
8) Outstanding ability of preventing osmosis,
9) Fine waterproofness
10) Easy to be processed.
Technological process:
1. First, dose and match measured raw materials;
2. After distributing, feed raw material into pouring mixer to make slurry.
3. Through thoroughly mixing, the slurry is poured to mould;,
4. After pre-curing under a certain temperature and time, the block would reach a certain hardness and prepare for cutting;
5. Tilting hoister would turn over 90 degrees of mould
6. Then open the mould and separate it from block. And take the block with side plate to the cutting cart
7.Firstly, the cutting machine vertical cuts blocks from both sides.
8. Secondly the horizontal cutting;
9.Finally the vertical cutting;
10.After cutting, the block is hanged to trolley with side plate by semi-finished product hoister;
11. Organizing the cut blocks and put them into autoclaves;
12. Hardening the blocks under certain temperature and pressure;
13. Carry the finished product out of autoclave;
14. The finished product hoister take the finished product to stock shield;
15. Packed for loading;
16. The side plate return back through side plate roller;
17. Side plate would be organized with open mould;.
18. Clean the mould and prepare for next pouring;
Send Inquiry to This Supplier
You May Also Like
-
Metal Casting MachineryNegotiableMOQ: 2700 Sets
-
Professional Infrared Self Cut to Length SystemNegotiableMOQ: 1 Set
-
Machine Metal Casting MachineryUS$ 1 - 100MOQ: 100 Pieces
-
Manual Vacuum Centrifugal Casting Machine for Silicone Rubber Jewelry Centrifugal Casting MachineUS$ 2000MOQ: 1 Set
-
Toothed Gear RingNegotiableMOQ: 1 Piece
-
Vacuum Pressure Casting Machine Jewellery CastingUS$ 35800MOQ: 1 Set
-
YIZUMI Die Casting Machine Shot SleeveUS$ 100 - 10000MOQ: 10 Pieces
-
Jianlong Custom Counterweight Forming Hydraulic PressUS$ 8000 - 30000MOQ: 1 Set
-
Wax Tanks for Wax Recirculation System of Investment Casting LineNegotiableMOQ: 1 Set
-
Ceramic Core Injector 35TNegotiableMOQ: 1 Set
