Silicone Rubber Coated Fiberglass Fire Sleeve 4 - 152 mm ID

Standard Size And Pack    Fire Sleeve 

• Inside diameter: 4 mm to 152 mm

• Length: 15, 20, 30 mtr coils

• Color: red, black, blue

• Wall thickness: 4 mm 0.5mm

Specification    Fire Sleeve 

• Main Raw Material : E-fiberglass yarn , silicone rubber

• Temp Range : Withstands 260 Deg C continuous / 1200 Deg C intermittent heat

Application    Fire Sleeve 

• Insulates wiring, hoses, oil / brake / transmission lines & more

• Use for bundling and protecting hoses, electrical wiring etc.

• Burn protection during under hood repairs and maintenance

Material specification   of fire sleeve

Base Fiberglass Substrate

• Fiber Type: E Glass

• Specific Gravity: 2.54-2.69

• Breaking Tenacity: 1.71 gf/TEX. Std. 1.71 gf/TEX Wet

• Tensile Strength: 450,000-500,000 psi.

• Breaking Elongation: 4.81% Std. 4.81% Wet

• Elastic Recovery: 100%

• Average Stiffness: 2824.3 cn/TEX

• Effect of Heat: Will not burn; Retains 75% tensile at 343°C; Softens at 732-877°C; Melts at 1121-1182°C.

• Effect of Acids and Alkalis; Resistance to acids is fair. Good resistance to most alkalis.

• Effect of Bleaches and Solvents: Unaffected.

Silicone Rubber Coating

• Durometer, Shore A: Initial; 35 Aged 240 hours at 200°C; 45

• Tensile Strength (psi): Initial; 875 Aged 240 hours at 200°C; 800

• Elongation %: Initial; 500 Aged 240 hours at 200°C; 200

• Flammability, UL94; V-1

• Dielectric Strength (volts/mil); 485

• Tested Range: 8.0-12.5kV

• Dielectric Grade A