24 Meter Positions Single Phase Energy Electricity Meter Test Bench High Accuracy

24 meter positions single phase energy electricity meter test bench high accuracy

high accuracy 
stable performance 

three phase energy meter test bench

Three-phase portable energy meter test instrument  with current and voltage source is an ideal device to test all kind three-phase energy meters accuracy below 0.2.  The equipment can generate 3-phase voltage , 3- phase current and any power factor signal ,the standard meter inside the equipment is class 0.05.

The equipment is box structure , light, and easy to carry ,it is very convenient to test meters on site, moreover the equipment can be used for testing meter in meter manufacture and as testing equipment in R&D institute.

ADVANTAGES

1.       Display of vector diagram for analysis of the supply conditions.

2.       DDS technology signal generator.

The signal generator adopts digital sine wave composing technology. The signal generator can trace voltage phase and supply a dummy load to  the tested meter by outputting adjustable current with different phase.

3.       High efficiency D-Class current amplifier and voltage amplifier.

The equipment adopts PWM power amplifier (or we called D-Class amplifier), which is high efficiency 9( >85%    )and very low heat consumption . the amplifier has protect function, it can avoid damage due to wrong connection or other manual operations. Current amplifier and output shifter can output different current. Voltage amplifier can output different voltage.

4.       Large LCD screen display

 MIAN TECHNICAL

1.       power and consumption

2.       power supply:1P2W  220V/240V 10%. 50Hz or 60Hz:

3.       Max  consumption 300VA

4.       current source:

Output current :3×0.001A-3×100A

Adjusting resolution: 0.01%(min.0.0001A)

Power factor:0~3600  resolution:0.10

Output frequency :45Hz~65Hz

Distortion(sine wave output): < 0.5%

Current stability of power source during sine wave output :0.05%(180s)

Output wave: sine wave

       2-21 harmonic wave, total should be less than 40%

       Odd harmonic waveform

       Sub harmonic waveform

Output capacity:50VA per phase

5.       Voltage source:

Loading: the load can be resistor /inductive/ capacitive(  4uF)

Adjusting resolution :0.01%(min.0.1V)

Output frequency :45Hz~65Hz

Distortion(sine wave output): <0.5%

Voltage stability of power source during sine wave output :0.05%(180s)

Output wave: sine wave

2-21 harmonic wave ,total should be less than 40%

Odd harmonic waveform

Sub harmonic waveform

 Output capacity:50VA per phase