Contact Platform Support
Help CenterAir Suspension
Related Products
-SGS and ISO9001:2000 certified.
-Rubber air springs, such as Sleeve air springs, Single/Double air spring .
H series Air spring:
BELLOWS : Wall gauge is approximately 5 mm.
GIRDLE HOOP: Wire wound type shown, molded into the bellows.
BEAD RING: upper and lower. countersunk steel type shown. May also be of a second stamped steel variety or made of aluminum.
AIR INLET: 1/4BSP parallel is standard. 3/4BSP parallel is also available for most parts.
BOLT: M10 x 45 mm Used for mounting the part.
MOUNTING PLATE: The plates must be strong enough and backed by structural members to prevent bowing of the forces or loads involved
K series Air spring:
BLIND NUT: M8 x 15 (two or four per each plate depending on part size). Used for mounting the part.
MOUNTING PLATE: The plates must be strong enough and backed by structural members to prevent bowing (of the forces or loads involved.
AIR INLET: 1/4BSP parallel is standard. 3/4BSP parallel is also available for most parts.
ZF series Air spring
BLIND NUT: M8 x 15 (two or four per each plate depending on part size). Used for mounting the part.
MOUNTING PLATE: The plates must be strong enough and backed by structural members to prevent bowing (of the forces or loads involved.
AIR INLET: 1/4BSP parallel is standard. 3/4BSP parallel is also available for most parts.
CY series Air spring
BLIND NUT: M8 x 15 (two or four per each plate depending on part size). Used for mounting the part.
AIR INLET: 1/4BSP parallel is standard. 3/4BSP parallel is also available for most parts.
Send Inquiry to This Supplier
You May Also Like
-
OEM Custom Stamping Parts Sheet Metal Stamped Welded ComponentsNegotiableMOQ: 1 Piece
-
Acrylic CNC Polishing Machines for Furniture IndustryNegotiableMOQ: 1 Set
-
Industrial Custom Machining Service for Large Steel Workpieces up to 3000 Kg, ISO Standard CompliantNegotiableMOQ: 1 Piece
-
CNC Machine ToolsNegotiableMOQ: 2300 Sets
-
Medical-Grade CNC Machining for Stainless Steel & Titanium Alloy ComponentsNegotiableMOQ: 500 Pieces
-
Custom Metal Material Processing for Electronic & Hardware PartsNegotiableMOQ: 50 Pieces
-
Reliable Waterjet Cutting Machine for Stone Marble Porcleain Cutting IndustryUS$ 20000 - 40000MOQ: 1 Set
-
OEM Customized Stainless Steel Aluminum CNC Machining PartsNegotiableMOQ: 1
-
High Precision Machining Products of Stainless Steel Made in ChinaUS$ 1.5 - 1.5MOQ: 1000 Kilograms
-
Stainless Steel Welding Tee Pipe FittingsUS$ 0.9 - 0.9MOQ: 200 Pieces
