34Cr NiMo6 Alloy Steel Round Stainless Steel Bars Used For Construction

Range of Rolled Products

Square blanks, mm 100, 105, 115, 120, 122, 125, 140, 150, 160, 170, 180, 190,200 Square sections as per technical agreements, mm 60x60, R9; 63x63, R9; 65x65, R9; 70x70, R9; 75x75, R1 2; 80x80, R12 Rectangular sections as per technical agreements, mm 60x170, 65x180, 70x160, 70x165, 80x165, 80x180, 90x150, 90x180, 90x220 Strip with standard tolerances, mm height 10-180 mm x width 36-300 mm Strips as per technical agreements, mm height 10-50, width 100-200 Flat blanks as per technical agreements, mm height 50-200, width 200-300 Hot-rolled round product with standard tolerances , mm 28, 30, 32, 34, 35, 36, 37, 38, 40, 42, 44, 45, 46, 47, 48, 50, 52, 53, 54, 55, 56, 57.5, 60, 62, 63, 65, 67, 70, 72, 73, 75, 80, 85, 87, 90, 95, 100, 105, 110, 120, 126.5, 128, 130, 135, 138, 140, 145, 150, 155, 160 Hot-rolled round product with tolerances as per DIN, mm 115-125 Rolled products with surface finishing by cold wire brushing as per technical agreements, mm 30-80 Hot-calibrated round product as per technical agreements, mm 27, 28, 29, 30, 32, 33, 34, 35, 36, 38, 40, 42, 45, 47, 48, 50, 52, 53, 54, 55, 56, 57, 60, 65, 68, 70, 72, 73, 74, 75, 78 Turned rolled products as per technical agreements, mm 25-105

STEEL GRADES

EN S235JRG2, S355J0, S355J2G3, C15(E), C22(E)-C60(E), 25CrMo4-42CrMo4, 34Cr4-41Cr4, 34CrNiMo6, 30CrNiMo8 DIN C15E, C22.8, 16MnCr5, St52-3 BS 070M20, 080M40, 070M55, 150M19, 655M13, 708M40, 709M40, 817M40 AFNOR XC18, XC38, XC48, XC38H1, XC48H1, AF50S, AF42C20, AF50C30, E36-3, AF60C40 SAE M1010, 1018, 1020, 1045, 8620H and other steel grades.