Contact Platform Support
Help CenterDW Series Mesh-Belt Drier With Mesh-belt, 60-130 Vaccum Dryer For Pharmaceutical, Chemical, Foodstu
Related Products
-
Model ZLG Series Vibration Fluidized Bed, 70-140 Vibration Vaccum Dryer, Food Drying MachineNegotiableMOQ: 1 Set -
SZG Series Double Cone Rotary Vacuum Drier, Steam, 30L-4000L Hot Water Vaccum Dryer For PharmaceuticNegotiableMOQ: 1 Set
-
Model YK-160 Swing Granulator For Wet Powdery Material Into Granulates, 3kw Granulator MachineNegotiableMOQ: 1 Set
-
XZS Series Vibrating Screen 2-300 Mesh 1400r/min Vibrating Screen Machine With Hopper, Vibrating SieNegotiableMOQ: 1 Set
-
20-300 Mesh Electrostatic LXS Series Centrifugal Screen For Pharmaceutical, Chemical, FoodstuffNegotiableMOQ: 1 Piece
DW Series Mesh-Belt Drier With Mesh-belt, 60-130℃ Vaccum Dryer For Pharmaceutical, Chemical, Foodstuff
Main Application:
The machine is suitable for drying the material in pharmaceutical chemical foodstuff, elastic gum, electronical industries dewatering vegetable, particle feed, gourmet powder, shredded coconut stuffing, organic color, compound rubber, acryl fibre, medicine product, medicine material , small wooden product, plastic product, aging and solidification for the electronic component and device.
Working Principle
The materials are uniformly put on the mesh-belt by the material charger. The mesh-belt uses generally 12-60mesh stainless steel wire net and it is drawn and moved inside the direr by a transmission device. The drier is composed of several units, the hot air is circulated separately.Some exhausted gas is discharged with a special moisture elimination blower. The waste gas is controlled through an adjustment valve.The hot air passes through the meshbelt covered with the material from the top to the bottom or from the bottom to the top and this will complete the heat and mass transfer process. This process will bring will fall into the material collector continuously. The top nand low circulation units can freely equipped according to the users demand. The unit can be selected according to be demand.:
Feature:
This machine is flowing and continuous type drying equipment firstly made by our factory. The machine is used for drying the piece, tape and particle state materials with good ventilation. The machine is suitable for the materials such as dewatering vegetable, herbal medicine of traditional Chinese medicine and others, for which the water content rate is high and the high temperature is not allowed . The machine owns the advantages, that its drying speed is fast,the evaporation strength is high and the product quality is good . The dewatering filtering cake state paste material, after the particle makeing or bar making, can be dried also.
Technical Parameter:
| Model | DW-1.2-8 | DW-1.2-10 | DW-1.6-8 | DW-1.6-10 | DW-2-8 | DW-2-10 |
|---|---|---|---|---|---|---|
| Unit number | 4 | 5 | 4 | 5 | 4 | 5 |
| Belt width | 1.2 m | 1.2m | 1.6m | 1.6m | 2m | 2m |
|
Drying section length |
8mm | 10mm | 8mm | 10mm | 8mm | 10mm |
|
Thickness of the material to be covered |
10-80mm | 10-80mm | 10-80mm | 10-80mm | 10-80mm | 10-80mm |
| Temperature | 60-130℃ | 60-130℃ | 60-130℃ | 60-130℃ | 60-130℃ | 60-130℃ |
| Steam pressure | 0.2-0.8Mpa | 0.2-0.8Mpa | 0.2-0.8Mpa | 0.2-0.8Mpa | 0.2-0.8Mpa | 0.2-0.8Mpa |
| Steam consumption | 120-300kg/h | 150-375kg/h | 150-375kg/h | 170-740kg/h | 180-500kg/h | 225-600kg/h |
| Drying time | 0.2-1.2h | 0.25-1.5h | 0.2-1.2h | 0.25-1.5h | 0.2-1.2h | 0.25-1.5h |
| Drying strength | 60-160 kg H2O/h | 80-220 kg H2O/h | 75-220 kg H2O/h | 95-250 kg H2O/h | 100-260 kg H2O/h | 120-300 kg H2O/h |
|
Total power of the blower |
9.9kw | 12.1kw | 9.9kw | 12.1kw | 18.2kw | 22.2kw |
|
Total power of the equipment |
11.4kw | 13.6kw | 11.4kw | 13.6kw | 19.7kw | 23.7kw |
Send Inquiry to This Supplier
You May Also Like
-
Acrylic CNC Polishing Machines for Furniture IndustryNegotiableMOQ: 1 Set
-
Reliable Waterjet Cutting Machine for Stone Marble Porcleain Cutting IndustryUS$ 20000 - 40000MOQ: 1 Set
-
Custom Plastic Stainless Steel Aluminum CNC Machining PartNegotiableMOQ: 1
-
CNC Lathe Turned Machining Solid Shaft PinNegotiableMOQ: 1
-
Autopilot Flight Parts Manufacture and MIM Powder MetallurgyNegotiableMOQ: 1 Piece
-
Refrigerant gas R407NegotiableMOQ: 1 Piece
-
High Precision Machining Products of Stainless Steel Made in ChinaUS$ 1.5 - 1.5MOQ: 1000 Kilograms
-
Stainless Steel Welding Tee Pipe FittingsUS$ 0.9 - 0.9MOQ: 200 Pieces
-
OEM CNC Custom Machining Engineering Small Packaging Machine PartsUS$ 0.2 - 100MOQ: 1 Piece
-
Www.xtlaser.comHot Sale Dot Peen Pneumatic Marking MachineUS$ 1,400 - 1,600MOQ: 1 Set
