SMC Cylinder Automatic Power Cable Coil Winding Machine Drive by Servo Motor

Delivery Time:20-25 working days after receiving advance payment
Certification:CE

 
 
SMC Cylinder Automatic Power Cable Coil Winding Machine Drive by Servo Motor

 
Description: Automatic cable twist tie machine be provided function with coil wind, auto twist tie finished in one end. There are three model of twist ite machine SD-168B(AC) coil AC cable with \"8\" form, SD-168B(DC) coil wind DC cable with \"8\" form. and SD-168C coil wind cable with circle form. Our automatic coil winding machine can twist tie many kinds of cable according to every customer\'s requirements.

Specification & Parameter :
 

Model of machine	SD-B68(AC)
Winding speed	1,100~1,300pcs/hour
Total winding Length	120~220mm
Length of the wire	Max.4000mm
Normal head length	0-100mm
Normal tail length	30-350mm
Length of cable tie	Can be adjusted
Number of turns for tie	Can be adjusted
Voltage	AC220/50Hz
Pressure of air source	0.5~0.8Mpa
Dimension	1,300mm*660mm*1,550mm
Weight	235kg

 

 
PRE-OPERATION PREPARATION
1, Add appropriate lubricating oil to each oil feeding part
2, Whether the air pressure exceeds 4.5KG/cm2
3, Whether the wire reel is in proper position
4, after the machine is started, see if the motor or other mechanical components sound abnormally
 

Operation Steps:
 
1, placement of wire: place the plug end of the wire into the wire reel locating block and press starting switch to enable the wire to be processed in each link by attaching to the winding rod until the wire binding is completed
2, adjustment of the wire length: loose the adjusting holder and adjust the wire to the desired length to the left and right, and then tighten the screw
4, Adjustment of wire allowance at the other end: loose the air cylinder base to enable the cylinder to stretch out, and then move the air cylinder base to get the desired length of the wire at the other end, and then tighten the screw.
 

With Full English Touch Screen