T2 86 , T2 101 , NQ , HQ Surface Set Diamond Core Drill Bits For Rock

Surface Set Diamond Core Drill Bits For Unconsolidated Rock Formations

T2 86 , T2 101 , NQ , HQ Surface Set Diamond Core Drill Bits For exploration core drilling Unconsolidated Rock Formations

 

Surface Set Diamond Core Drill Bits For Unconsolidated Rock Formations

The surface-set diamond bits are set with a singular layer of natural or synthetic diamond utilizing a hard matrix compound on the face of the bit. The diamond set design ensures sufficient overlap to prevent premature wear of the matrix. 

Surface set diamond bits are primarily recommended for use in drilling relatively soft, abrasive, unconsolidated formations that are not effectively drilled by impregnated diamond bits. They are also recommended for use in drilling harder formations where the available rotational speeds and bit loads are insufficient to use impregnated diamond bits due to drilling equipment limitations.

 
Notice:
 
To select the right bit for the job, assess the speed and power of your drill for the size and depths of the holes to be drilled and assess ground conditions such as rock type/formation and down-hole conditions.
 

Size:
ROSCHEN bits are available in all standard drilling sizes . Also, non-standard sized bits can be produced according to requirements from clients.
 

Crown Height:
ROSCHEN offers crown impreg depths of  9mm, 12mm, and 16mm .The taller crown heights provide improved bit stability and reduced vibrations, enhancing bit life and performance.

 

Waterways: 

Various waterways are available for diamond impregnated bits. Differing waterways allow for better flushing in various ground conditions and drilling systems.

 

Matrix:
ROSCHEN impregnated bits matrices can be selected by our engineer according to ground conditions at client\'s work site. 

 

Threads:
standard Q threads as well as thread types required by clients are available.