24 V High Power 36W RGB LED Pool Light CE / ROHS , 6000K Cool White LED Light

 24 V High Power 36W RGB LED Pool Light CE / ROHS , 6000K Cool White LED Light
 
 
36W RGB LED Pool Light , CE / ROHS High Power 12pcs Edison LED
 
High Power 12pcs Edison LED, 36W, AC/DC 12V. Surface Mounted, Super Brightness Newest Swimming Pool Products, Smart & Delicate Size, Perfect Heat Dissipation & Performance
 
Quick Detail:
1. Model No.: HX-WH235-36P
2. Material: 304 Stainless Steel panel+ PC housing
3. Voltage: AC/DC12V AC/DC24V
4. Power: 36W
5. Size: 235*40mm
6. LED QTY: 12PCS
7. Beam angle: 180degree Diamond diffusor
8. LED Brand: Edison
9. Warranty: One year
10. Life-span: above 50, 000 hours.
11. Weight: 1.1kg
12. Installation: Surface Mounted/Exposed
 
 

 
Controller:
1, Automatic changing (two wires)
2, Switch Power On/Off (two wires)
3, External controller (Can get the RGB color changing synchronous), (four wires)
6, DMX512 (Can get the RGB color changing synchronous), (four wires)
7. Wi-Fi control (Can get the RGB color changing synchronous), (four wires)
 
 
Applications:
Be used for the decoration lighting under water or any water views, such as the swimming pool, eruptive
fountain, scenic ponds, seashore, and so on.
 
 
Advantages:
•Adopt brightness high power Edison chips,F5 DIP or SMD 3014 as light source and any single color is
available, like red, green, blue, yellow, white and RGB colors.
•CE RoHS approved, IP68 waterproof, 1 year warranty
•Adopt 304SS Panel & PC housing as the body shell which is corrosion resistant and quick heat dispelling
•Uses up to 80% less energy than incandescent pool lights, Energy saving and environmental protecting.
•Switch off/on control,Internal control,External control, DMX and WIFI control option.
 
Specification:
 

 
Note:
•This RGB led pool lamp should be installed not deeper than 100cm underwater.
•The power wire of the pool wall lights shall be joined with other power wire out of the water. Waterproof
treatment should be done if the joint is in the water otherwise there is risk for water intrusion.
•The IP68 waterproof led swimming pool lamps should be in the water for the test of remote function or
other functions, and don\'t test it more than 3 minutes out of the water otherwise the light will be possibly
damaged or caused disfunction. If the user is not available to test it in the water, then please shut off the
light every 3 minutes to be cold for the new test.