Plastic Film / Paper Dry Laminating Machine High Speed Cylinder Controlled

HIGH SPEED LAMINATING MACHINE

This laminating machine is suitable for BOPP,PET,CPP,PCVD,materlized film,aluminum foil and other roll type material.

Main characteristics

1)supply glue and laminating use double motor,double inverter synchronos adjust speed
2)wind film smoothly,synchronos line speed
3)brige type heat oven,four segment separate constant heating system. (options:add auto rectify in the month of heat oven)
4)supplying glue and laminating use pneumatic type press roller
5)two method to supply glue:blade and squeeze,can choose deponds on productions
6)unwinding and rewinding use powder tension control
7)use segment system can control the temperature in best station
8)first and second unwinding use auto rectify
9)rotary double working station rewinding
10)auto constant tension

charachteristic pictures:  

1,double working shaft,auto cutting
2,Seimense PLC
3,EPC system
4,4 segment heat oven,pneumatic close/open

Quick Detail:

The machine is applied to double layer or multilayer lamination for various roll materials, such as plastic film, paper and aluminum foil, etc.

The machine has independent double-arm, dual-working position rotary turret for unwinder and rewinder. The machine adopts double-photoelectric E.P.C system, ultrasonic wave E.P.C system, PLC auto tension control system, oven hot air circulation system, and pneumatic open oven, etc., with the features of high speed laminating, low noise, low air pollution and others

Description:

1. The machine adopts Siemens PLC programmable control system; full auto tension control by PLC.

2. Taiwan Weinview color touch screen man-machine interface operation, concentrated display and control working state, speed, tension and other parameters.

3. Double frequency inverters or four frequency inverters control system is optional, Japan Yasukawa inverter.

4. Independent double-arm, dual-working position rotary turret for first unwinder, second unwinder and rewinder.

5. Air-expansion shaft for first unwinding, second unwinding and rewinding.

6.Double-photoelectric computer E.P.C system is installed at first unwinding and ultrasonic wave E.P.C system is installed at the exit of oven.

7. Low friction pneumatic floating roller is installed at the entrance of oven; full auto tension control by PLC inside the oven.

8. Glue spreading by anilox roller, doctor blade from Switzerland, independent motor responsible for horizontal moving of blade holder.

9. Conductive oil heating inside laminating hot roller, with features of even temperature and power saving.

10. Gluing pressing roller and laminating pressing roller adopt pneumatic pressure and the pressure is adjustable.

11 Total length of the oven is 8 meters, with pneumatic open; inner guide rollers are shaped in arch, with belt transmission actively; aisle and guardrail are installed at the side of the oven.

12 The oven is divided into 4 sections with external electric heating system and temperature for every section can be regulated independently.

13. Hot air circulation structure is designed inside the oven and the oven inner adopts stainless steel 304; the heat can be recycled and save energy.

14. Front exhaust hood is installed at the entrance of the oven and exhaust the gas of high concentration volatilized initially.

15. All guide rollers are highly hardened aluminum alloys, with dynamic equilibrium treatment

Applications:

This series of Laminating Machines are suitable for composition of all kinds of materials in packing industry such as plastic-plastic, paper-plastic and aluminum-plastic compositions. 

Tension, pressure, temperature manually.

Edge correction device (EPC)

High-level efficient drying tunnel

Specifications :