Medium Flow Rate Carbon Steel Y Strainer Filter For Liquid Filtration

Delivery Time:15-25 Days After Confirmation
Certification:ISO9001, CE

Medium Flow Rate Carbon Steel Y Strainer Filter For Liquid Filtration

Quick Detail:

1,High strength, fine sealing

2,Carbon steel ,SS304 or 314

3,connection type:flange ,welding ,thread etc

4,Type:Y strainers

Description:

1, Carbon steel ,SS304 or 314 available

2,CE and ISO9001 approved

3,all types of flange connection available

Water, steam, and oil as suitable medium Size: DN15-DN600 (1/2 to 24 inches) Nominal pressure: PN1.0/1.6MPa Body and bonnet: cast-iron and ductile-iron Screen: stainless steel Bolt and nut: carbon steel with zinc-plated

Specifications:

Y welding flange strainer

DN	L	H	N
50	2\"	290	245	ZG3/8\"
80	3\"	350	315	ZG3/8\"
100	4\"	425	360	ZG3/8\"
150	6\"	540	460	ZG3/4\"
200	8\"	700	540	ZG3/4\"
250	10\"	800	660	M20×1.5
300	12\"	950	750	M20×1.5
350	14\"	1050	845	M20×1.5
400	16\"	1250	920	M20×1.5

Applications:

A Y-strainer screen can be cleaned by removing the plug in the bushing, cap or bolted cover allowing the strainer to drain the loose material inside the screen. If a blow-off valve is connected to the strainer it can be opened to achieve the same result as the above. The Y-strainer screen can also be cleaned by removing the bushing, cap or cover to access the screen element.

Competitive Advantage:

A Y-strainer has the advantage of being able to be installed in either a horizontal or vertical position.  However, in both cases, the screening element or \"leg\" must be on the \"downside\" of the strainer body so the entrapped solids can be properly collected and held for disposal.  Eaton heavy-duty Model 85 Y Strainers are furnished with high quality stainless steel screens that are carefully fabricated to fit the strainer body perfectly.  This, coupled with the precision machined screen seat on the body of the strainer, protects against any bypass.

Y strainers are a cost-effective solution for the mechanical removal of unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process equipment.