Contact Platform Support
Help CenterCarbon Steel Lined Ball Valve For Chemical Corrosion Resistant
Related Products
-
Acid Resistant Fluorine Lined Sight Glass , 25mm-100mm -20 - 120NegotiableMOQ: 1 Piece -
Industrial Lined Ball Valve With Once-Through Floating StructureNegotiableMOQ: 1 Piece
-
Lightweight Pump Valve , Fluoroplastic Lining Dumping Valve 1MpaNegotiableMOQ: 1 Square Meter
-
Chemical Water Transfer Magnetic Driven Pump , Electric Motor Centrifugal Pumps CQBNegotiableMOQ: 1 Set
-
Horizontal CQB Magnetic Coupled Pump With Fluorine Lining , Steel Pump CaseNegotiableMOQ: 1 Set
Carbon Steel Lined Ball Valve For Chemical Corrosion Resistant
Performance Parameters:
Inside nominal diameter (DN) 50mm,80mm
Nominal pressure (PN) 1.0Mpa
Service temperature -20℃~120℃
Model meaning:
Q41F-10C-80 industrial pump valve
4 Connection flange
1 Once-through floating structure
F The line material is fluoroplastics
10 The nominal pressure is 1.0Mpa.
C The valve material is carbon steel
80 The inside nominal diameter is 80mm
Sinofine is professional on offering structural industrial pump valves , which provide long lasting solutions for the Customer. All valves are lightweight (15% to 20% of most metallic alloys) and offer outstanding corrosion resistance. Pumps and valves are designed or chosen primarily for their mechanical performance i.e. containment of pressure, fluid sealing and, in the case of pumps, pumping capacity. For reasons of economy manufacturers offer their products in a limited range of materials. Each of these materials is suitable for a range of common fluids, and has the advantage of being available with relatively short delivery times. However, for corrosive and/or erosive fluids the user may require special designs (e.g. of seals) and/or special materials, which increase cost and delivery times. The balance of cost versus the likelihood of failure due to corrosion must be taken into account along with the criticality of the component, i.e. what are the consequences of a failure. For example, a firewater pump is a high criticality item and materials should be chosen so that there is no safety risk.
When requesting non-standard items it is important to realize that most of the components in a valve or pump are cast and hence an alloy with good foundry characteristics must be selected. A compatible wrought alloy must be selected for items such as shafts and stems. Even when an alloy is available as a casting, it may not have all the properties that are required.
Sinofine valves are completely machined on the outside and the inside, they are not subject to casting defects such as cracking, or porosity. They in salt water, waste water, or chlorinated water and are excellent with most acid and alkaline solutions! The benefits of upgrading from pump valves to the Sinofine pump valves include superior corrosion resistance, a much lighter weight valve (approximately 15% the weight of metallic valves), and a much better overall life span.
Our unique valves can be used in a variety of locations. Sinofine pump valves are used primarily for corrosive applications such as salt water, brackish water, river water and wastewater applications. They are far superior to other supplier which is excellent on not corrode in most corrosive applications, and also they are lightweight.
|
Model |
L |
L1 |
D |
D1 |
D2 |
n-Φd |
z-Φd |
H |
b |
L0 |
Weight |
|
FQ41F-10C-50 |
160 |
250 |
230 |
125 |
190 |
8-Φ14 |
4-Φ18 |
140 |
20 |
14 |
10 |
|
FQ41F-10C-80 |
200 |
400 |
245 |
160 |
210 |
10-Φ14 |
200 |
15 |
20 |
Send Inquiry to This Supplier
You May Also Like
-
Customized Factory Direct Water Weed Cutting Boat In The RiverUS$ 30,000 - 100,000MOQ: 1 Set
-
YDS Cryogenic Container/tank/dewar for Liquid NitrogenUS$ 168 - 678MOQ: 1 Piece
-
SS304 Two Motions Reactor Vessels With PlatformUS$ 1,000 - 10,000MOQ: 1 Set
-
Plastic Diesel Oil Tanks , Fuel TanksUS$ 25 - 85MOQ: 1
-
Pressed Carbon Steel Shell Segment for Pressure VesselUS$ 500 - 10,000MOQ: 1 Set
-
Stainless Steel SS304 316L ReactorUS$ 2,000 - 50,000MOQ: 1 Set
-
Safe SF6 Gas Cylinder With Different Voloume Liter and kgUS$ 350 - 520MOQ: 1 Piece
-
Alloy 400 1800 Psi Single Ended 1/8 1/8" Female NPT Gas Sample CylindersUS$ 150 - 300MOQ: 1 Piece
-
Tin-plated and Aluminum CansUS$ 0.1 - 0.2MOQ: 30000 Pieces
-
Co2 Cartridge CylinderNegotiableMOQ: 20000 Pieces
