Contact Platform Support
Help CenterDouble Color Hot Runner Injection Mould LKM For Handle
Related Products
-
Multi Cavity Double Injection Mould ABS PU With Hot RunnerNegotiableMOQ: 1 -
Professional Custom Double Injection Mould SR 1/2\" 1000k ShotsNegotiableMOQ: 1 Metric Ton
-
LKM Double Injection Mould , Keypress DME Mold S50C ABSNegotiableMOQ: 1 Kilogram
-
Multi Cavity Double Injection Mould Hot Runner Point GateNegotiableMOQ: 1 Set
-
HASCO Hot Runner Double Injection Mould For Automobile PartsNegotiableMOQ: 1
Certification:ISO9001: 2008
Double Color Hot Runner Injection Mould LKM For Handle
Quick Detail:
1. Gate type: Hot runner to sub gate
2. Standard of mold accessories: LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.
3. Mold base standard: LKM Local standard, DME or HASCO,Customize according to customers\' requirements
4. Mold life: 1000k shots or according to customers quantity condition to decide it with saving cost for our customers.
5. The part name: handle (double color injection mold)
6. Plastic material: PP+TPR
7. Cavity material: S136 HRC48-52
Applications:
Molding the plastic product by plastic injection machine
Description:
Mold construction description: Hot runner system, double color injection mold
The part name: handle
Mold type: double color injection mold
Sprue Radius: SR 1/2\"
Locating ring Dimension: Ф3.99\",
Part Material: PP+TPR
Ejection type: ejection sleeve
KO Pattern: 7”x7”,
This part has very high appearance requirements, the defect showed below will not be acceptable, for example, weld line, Dark Sport,Sliver Marks,Gas Trap Effect,Visible Ejector Marks,Deformation,Short shot Filling,Burnt Streaks,Sink Marks,Flash,Over dimension,Under dimension,Stress Crack etc. Moreover, the product finishing surface must meet the requires of texture.
This mould is made in Shiny Mould Factory. It is a mould exported to USA, with complicated structures and high quality requests. Customer needs mold life to be over 1 million shots. We can ensure this mold life and give warrant to our customer that once some mould components are broken during working, if it is caused not by the operation fault from the workers, we can provide new mould components to them free of charge.
Compared with traditional method of molding, advantages of two shot injection molding process are as follows:
1. The core material can use low viscosity materials to reduce injection pressure.
2. From the consideration of environmental protection, the core materials can use recycled materials.
3. According to the different use of characteristics, such as thick wall finished product cortex use soft material, the core material can use hard material or foamed plastic to reduce weight.
4. Low quality of core materials is helpful to reduce costs.
5. The cortex material or core material can use expensive material with special surface properties, such as material of EMI Shielding or high conductivity to increase product performance.
Specifications:
|
|
handle (double color injection mold) |
|
2.Plastic material |
PP+TPR |
|
3.mould base material |
S50C |
|
4.cavity material |
S136 HRC48-52, H13, 420, P20, D2, 1040, 0-1, S-7, A2, 1.2344, 1.2083, 1.2311, 1.2739, 1.2343, 1.2510, 1.2767,NAK80,SKD61,718,738,DF-2 etc |
|
5.mold life |
1000k shots or according to customers quantity condition to decide it with saving cost for our customers. |
|
6.cavity number |
2+2 |
|
7.runner |
Hot runner |
|
8.gate type |
Sub GATE |
|
9.mould weight |
320 kg |
|
10. mould base standard |
LKM Local standard, DME or HASCO,Customize according to customers\' requirements |
|
11.cycle time |
32second |
|
12. standard of mold accessories |
LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires. |
Send Inquiry to This Supplier
You May Also Like
-
Actived Charcoal Filter CylinderNegotiableMOQ: 20 Sets
-
5L Hospital ECG Medical Ultrasound Coupling GelUS$ 0.1 - 1.1MOQ: 1 Carton
-
Animal Ultrasonic Detection Sets for Cow, Horse, Pets Etc. Palm ScannerNegotiableMOQ: 1 Set
-
U Fence Staples for Wooden Posts - 1.5 Inch Leg Length, Hot-Dip Galvanized, China FactoryNegotiableMOQ: 5 Tons
-
99 Cent Store Stationary China Product Cheap Plastic GlobeUS$ 0.05 - 0.3MOQ: 200 Pieces
-
High Quality Disposable Wooden Custom Medical Tongue Spatula DepressorUS$ 18 - 28MOQ: 10 Cartons
-
Needle Punched Qdsanhong and EVA Material Car Floor MatsUS$ 8.65 - 15MOQ: 1000 Pieces
-
Mini Coil With ROHS GEM008US$ 0.5 - 0.8MOQ: 1000 Pieces
-
Safety HammerUS$ 0.65 - 4.5MOQ: 1000 Pieces
-
YSSY-500 High Performance Low Price Hospital Medical Infusion PumpNegotiableMOQ: 1 Set
