Contact Platform Support
Help CenterOtating Stage Fireworks Firing System + 4 Receivers With 1 Controller+ Receivers Are Programable Rotating Stage Fireworks Firing System + 4 Receivers With 1 Controller+ Receivers Are Programable
Related Products
-
Single Fountain Wheels for Fountains Fireworks Firing System+ Special Equipment + Fireworks Stage SystemNegotiableMOQ: 1 Piece -
Double Fountain Wheels for Stage Fireworks Display + Wire ControlNegotiableMOQ: 1 Kilogram
-
CE Passed 6 Cues/ Channes Remote Wireless Fireworks Firing System + 20 Pcs Igniters for Consumer Fireworks Display +150 M RemoteNegotiableMOQ: 1 Kilogram
-
CE Passed With 12 Channels Fireworks Firing System/ 150 M Remote Control + Fireworks Firing SystemNegotiableMOQ: 1 Kilogram
-
24 Cues Remote Sequential Fireworks Firing System+ Hand Contorl & Remote Control Fireworks Firing SystemNegotiableMOQ: 1 Kilogram
Specifications
1. 4 pcs receivers in total
2. Programable firing system
3. 1 controller can run 4 receivers
rotating firing system
PRODUCTION INTRODUCTION
This machine is our unique stage effect product, it is whole new exterior design, consummate produce technics,original technical performance, make it is in the lead position among all others of its class. With our company experience in setting off fireworks for many years and extract the strongpoint of stage effect equipment. We manufacture this more powerful, and more
Compatibility, easy operational product.
Product Specification:
Receiver:
Size: 26.5*17*13 cm Weight: 2.7 KG
Channels: 6
Voltage: 12V (8×1.5V AA batteries)
Characteristic:
1. It can remote control machine rotating, stop.
2. It can control 6 group fireworks on each machine.
3. Don’t need any cable just remotely control them
Video Operate Link: /watch?v=JbhZk7-jpDw
INSTALLATION METHOD
Installing receiver:
1. Put 8 pcs AA batteries(5) into battery box
2. Take the igntior of fireworks to corresponding clamp, test in the receiver see whether the connection is reliable.
3. When test indicator light shine, it means the connection is reliable.
Learning process:
This learning function is to make the remoter can control the machine, you can make different remoter to control same unit through this function.
To make a rotating machine controlled by one remoter:
1. Keep pressing down “learn” till the indicator light light. (2-3 times is better)
2. Let the remote control point at the machine, press down the “1” key on the remote control and release, wait the indicator light of “light” go out, then you can control the machine by this control.
Attention:
Making sure doing step 2 twice, must wait the light is on then can control it.
Send Inquiry to This Supplier
You May Also Like
-
Actived Charcoal Filter CylinderNegotiableMOQ: 20 Sets
-
Animal Ultrasonic Detection Sets for Cow, Horse, Pets Etc. Palm ScannerNegotiableMOQ: 1 Set
-
5L Hospital ECG Medical Ultrasound Coupling GelUS$ 0.1 - 1.1MOQ: 1 Carton
-
Disposable Medical ConsumablesNegotiableMOQ: 2500 Boxes
-
U Fence Staples for Wooden Posts - 1.5 Inch Leg Length, Hot-Dip Galvanized, China FactoryNegotiableMOQ: 5 Tons
-
99 Cent Store Stationary China Product Cheap Plastic GlobeUS$ 0.05 - 0.3MOQ: 200 Pieces
-
High Quality Disposable Wooden Custom Medical Tongue Spatula DepressorUS$ 18 - 28MOQ: 10 Cartons
-
Needle Punched Qdsanhong and EVA Material Car Floor MatsUS$ 8.65 - 15MOQ: 1000 Pieces
-
Mini Coil With ROHS GEM008US$ 0.5 - 0.8MOQ: 1000 Pieces
-
Safety HammerUS$ 0.65 - 4.5MOQ: 1000 Pieces
