Steel Track Roll Forming Machine, Metal Stud Roll Forming Machine With Hydraulic Cutting

Steel Track Roll Forming Machine, Metal Stud Roll Forming Machine with Hydraulic Cutting

Ⅰ:Composition of machine

Roll forming main machine……………………………1 unit

Manual de-coiler……………………………………… 1 unit

Control panel………………………………………….1 unit

Hydraulic station…………………………………… …1 unit

Manual out table……………………… ……………….2 unit

Spare tools……………………………………………...one box

Ⅱ: Details of each composition

A: Roll forming main machine

1: Coil width: base on customer profile (in mm)

2: working speed: 12m—15m/min (not contain cutting)

3: roll station: 12stations

4: material of roller: Gcr15 forge steel, polished and coated with chrome HRC58-62°

5:material of main shaft:45﹟forge steel   diameter roller: Ф56mm

6: main power: 5.5kw    

7: forming thickness: 0.5mm—1.5mm color steel and galvanized steel

8: Transmission: by Chains 1.0 inch single line

9: size of machine: 6000x800x1200(mm)   L x W x H

10: weight: about 4000Kgs

11: color of machine: blue and yellow

12:  Cutting:

(1)   Machine adopt hydraulic cutting

(2)   Cutting after forming: Cut the sheet after roll forming to required length

(3)   Cutting motion: The main machine automatically stops and the cutting will take place. After the cutting, the main machine will automatically start.

(4)   Material of blade: CR12with heat treatment  4SETS cutters

(5)   Length measuring: Automatic length measuring

(6)   Tolerance of length: 3m 1.5mm